Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end magnets, high quality bearings and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.
These include a prop adapter and have a built in aluminium mount for quick and easy installation on your multi-rotor frame.
These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.
Lipo cells: 2-3s
Max Watts(W): 99
Max. current(10s): 9 amps
No Load Current: 0.5 amp
Intemal Resistance: 0.207 ohm
Number of Poles: 14
Shaft Size: 5mm
Dimensions(Dia.xL): 28 x 25 mm
Bolt Holes Spacing: 16 & 19mm
Bolt thread: M3
Connector: 3.5mm Bullet Type Connector
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Please post the bearing sizes. I bought 4. Three are great. 4th one sounds send feels like it's full of sand.Gute Leistungsdaten, aber die Mitnehmer laufen nicht 100pcnt rund, haben eine schlechte Passung.1. they do not come with the motor mount pictured.
2. "high quality bearings and all are precision balanced for smooth runnin" this is SO untrue each one shakes my quad add all four running with no props and no prop shaft, just the motor alone on a 10" h quad so stiff frame and my quad will vibrate across the floor at a pretty good clip, thought about putting wheels on it instead of landing gear and let it vibrate around like a remote control car.
As all four are doing it I could not recommend these motors to anyone.These motors are useless to me as they shipped without the necessary mounting hardware. Hobbyking has been unable to provide me the missing peices. Would not order again.these really do not go with the predator frame at all, much too weak. don't get any lift at all until full throttleExcellent motor, price worthy. It remains cool after flying for a long time continuously (two 3s battery, propeller 9x4.7, almost 30-35 minutes of flight time) though little bit noisy. I have purchased 5 of it and planning to buy more.. :-)Great quality, precision made with nice furnishings. Look great and work great!honestly these are so far my FAVORITE motors since flying multi rotors, i love em with 8045 props too, just ordered the 2213 version today, lets see how they match upTest with DJI 10X3.8 (stronger model, not normal)
Thrust , Efficency , Power , Throttle position
10X3.8 DJI renforces, masse 12g, Moteur Multistar 2209 980KV
Pousse 100g - Efficacit 10.99g/W - Puissance 9.10W gaz 31pcnt
Pousse 150g - Efficacit 10.23g/W - Puissance 14.65W - gaz 38pcnt
Pousse 200g - Efficacit 9.48g/W Puissance 21.09W - gaz 46pcnt
Pousse 250g - Efficacit 8.96g/W Puissance 27.90W - gaz 51pcnt
Pousse 300g - Efficacit 8.45g/W Puissance 35.52W - gaz 57pcnt
Pousse 350g - Efficacit 8.02g/W Puissance 43.62W - gaz 63pcnt
Pousse 400g - Efficacit 7.82g/W Puissance 51.17W - gaz 68pcnt
Pousse 450g - Efficacit 7.42g/W Puissance 60.60W - gaz 73pcnt
Pousse 500g - Efficacit 7.11g/W Puissance 70.36W - gaz 79pcnt
These are powerful awesomely balanced motors. I have them on a custom carbon fiber mini H quad swiinging 8x4.5 nylon props. Its a beast! Thank you for stocking them in the USA!