Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Multistar 2216-800Kv 14Pole Multi-Rotor Outrunner

Generating Links

Turnigy Multistar 2216-800Kv 14Pole Multi-Rotor Outrunner

Price:

Now save save $0.00 $0.00

$18.42
Status:
Out of stock!
SKU:
9192000116-0
want FREE shipping? Click here to find out more!

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end magnets, high quality bearings and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

These include a prop adapter and have a built in aluminium mount for quick and easy installation on your multi-rotor frame.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 800
Lipo cells: 2-3s
Max Watts: 222W
Max. current(10s): 20 amp
No Load Current: 0.5 amp
Intemal Resistance: 0.169 ohm
Number of Poles: 12
Shaft Size: 5mm
Dimensions(Dia.xL): 28 x 32 mm
Bolt Holes Spacing: 16 & 19mm
Bolt thread: M3
Connector: 3.5mm Bullet Type Connector
Weight: 66g

  • Kv(rpm/v) 800.00
  • Max Current (Motor) (A) 20.00
  • Resistance (mh) 169.00
  • Max Voltage (V) 11.00
  • Power (W) 222.00
  • Shaft A(mm) 0.00
  • Length B (mm) 35.00
  • Can Diameter C(mm) 28.00
  • Can Length D(mm) 19.00
  • Total Length E(mm) 35.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Robert | Verified Buyer

  • Overall
  • Value
  • Quality

So far so good. Lost a spinner nut though.

Dec 11, 2016

Uses a M5X.8 thread spinner nut

Robert | Verified Buyer

  • Overall
  • Value
  • Quality

So far so good. Lost a spinner nut though.

Dec 11, 2016

Uses a M5X.8 thread spinner nut

Robert | Verified Buyer

  • Overall
  • Value
  • Quality

So far so good. Lost a spinner nut though.

Dec 11, 2016

Uses a M5X.8 thread spinner nut

Joanna | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Apr 01, 2015

Might want to stay away from purchasing this motor and choose one with a solid shaft coming out instead of the "aluminum prop adapter" that "bolts on" like this one. Any slight thread damage and you wind up buying a new motor because you cannot buy just a prop adapter by itself, and no other will fit. On the other hand, the "collet type" prop adapters are readily available in any hobby shop that fit the standardized shifts. Very disappointing since they advertise these in the new Model Aviation AMA mag, andf yet both USA warehouses are out of them. Can't even buy a motor without lots of downtime.

Owen | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 28, 2015

I bought these for my first quadcopter and was and still am happy with them. Unfortunately they now come without mounting plates. There's a slot in the box for a mounting plate but no plate. I see now it says in the description that it comes with a "built in aluminum mount for easy installation". BS - now I have to try to find mounting plates to match the holes in the motor bottom. There are no screws to fit these holes either. Buyers beware!

jherb | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 24, 2015

I received my Multistar 2216-800 motors today, shipping was fast and they arrived in excellent condition. I am using them with a 25 amp Q-Brain esc. and 9x4.5 APC props. I did a test run using the 4 in one connector with my RX and they all ran perfectly within 5pcnt of max RPM. Very impressive motors!

Thomas | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 14, 2015

2 out of 5 motors have bad bearings out of the box. I bought them after having bad experience with NTM Motors but no luck again. I like to buy from HK but it looks like we should not save money on motors, I do not want to crash my quadcopter with 3DR Pixhawk on it because of cheap bearings.

Maria | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 07, 2015

Fantastic motor! nicely balanced and runs much smoother than the NTM ones and also much cooler. Currently using them on a 450 quad, 4s 4000 mah, 10x5 props, and getting about 12 min fligh with LOTS of power. The only thing is that some of the motor's bearings are harder than others. Overall a very recommendable motor.

Genetics101 | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 08, 2014

This motor has awesome power & very quiet! I've purchased probably 40 of these motors in the last year or so & not one motor has been bed, the price & quality of these motors can't be beaten

MrMous | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 31, 2014

good little motors, great amount of lift on a small build

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!