Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy MultiStar BLheli_32 ARM 51A Race Spec ESC 2~6S (OPTO)

Generating Links

Turnigy MultiStar BLheli_32 ARM 51A Race Spec ESC 2~6S (OPTO)

Price:

Now save save $0.00 $0.00

$21.99
QTY:
Shipped From:
  • USA
  • Global
  • EU
Already Purchased
ETA: No ETA At This Time [ ? ]
Status:
Backorder
SKU:
9351000104-0
want FREE shipping? Click here to find out more!

Turnigy MultiStar BLheli_32 ARM ESCs are super simple to install and are very easy to setup. They have already taken places on the podium a number of times with our beta testing Ninjas. If you're looking for an edge against the competition and take your FPV drone racing seriously the Turnigy MultiStar 32bit ESCs are worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (Rumored to have been developed in DrEvils Lab) and deliver a smooth linear throttle response without sacrificing a rapid, crisp response to any throttle inputs.


Turnigy MultiStar ESC's come pre-tinned, solder ready, all you need to do is adjust the wire lengths, solder on the type of battery connection of your choice and then solder on the motor wires. With their small lightweight design these ESC's will have you racing fast and at a very affordable price.


Features:
• Smooth and linear throttle control
• Fast response to throttle inputs
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)


Specs:
Constant Current: 51A
No of Cells: 2-6S Lipoly
Voltage: 8.4~25.2V
BEC: Opto
Timing: Auto
Frequency: 48Mhz
Governor: None
MCU: Arm Cortex-M0
Dimensions: 36 x 21 x 5mm
Weight: 17.2g inc wires

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Valev | Verified Buyer

  • Quality
  • Overall
  • Value

Good

Jan 21, 2021

Very good ESC!

steven | Verified Buyer

  • Overall
  • Value
  • Quality

Stopped working after 2 weeks

Nov 11, 2019

stopped working after 2 weeks of moderate use

GJ | Verified Buyer

  • Quality
  • Overall
  • Value

Great controller

Sep 07, 2019

The ESC works great.
Programming with a passthrough with an Arduino Nano and BLHeli_32.
Doesnt even get warm at 55A.

Klaus | Verified Buyer

  • Value
  • Quality
  • Overall

one smoked up by the first use

Aug 09, 2019

I bought 2 of them. On first connecting on a 4S battery one of them broke immediately ( both was connected in parallel mode, so the polarity of the battery was right ) , it came a little bit smoke out the housing and since probably missing a phase, a connected motor jerky only, this is no good quality

Norbert | Verified Buyer

  • Overall
  • Value
  • Quality

Good ESC also or glider

Jun 23, 2019

I used it as a Glider ESC with 2S Lipo at 35A. No need for a BEC, because I use HV Servos. Stays cool and good brake with a 16x8 prop

Klaus | Verified Buyer

  • Value
  • Quality
  • Overall

Geniale Regler mit Telemetrie

Jun 12, 2019

Perfekter Regler für Copter, Modellboote und Flugzeuge. Läßt sich einwandfrei löten, man sollte es nur ein wenig können..... Eine Anleitung wird nicht benötigt, es ist ein blheli_32 Regler und die bedienen sich alle gleich.... Mit der blheli_32 Suite läßt sich der Regler einwandfrei programmieren, hat sogar Vorwärts und Rückwärts Funktion (wenn man will). Zusätzlich vorhanden ist Telemetrie, mit dem Blheli Telemetry Feeder ist diese sogar mit Frsky und Flysky zu nutzen.

Geoff Kemp | Verified Buyer

  • Value
  • Quality
  • Overall

Difficult to Solder

May 24, 2019

I could not get a reliable joint on the motor tabs because the tabs can suck a massive amount of heat out of the solder before it flows. no matter how hot I got the tab and iron I always ended up with a dry frosty joint. My 60 watt iron I've used on thousands of things RC big and small. thick and thin for many years without difficulty just could not do the job. The last attempt I melted one of the FETS of the board and still the solder would not flow enough. Dang!

William | Verified Buyer

  • Overall
  • Value
  • Quality

Great ESCs

Jan 07, 2019

I have never had any problems with these. All the settings are made with BLHELI 32 software available free on line. These are the most reasonably priced ESCs I have found that are rated at 51 amps 6s.

Zdenek | Verified Buyer

  • Value
  • Quality
  • Overall

No user manual

Apr 24, 2018

It is not possible change any setting, there is no user manual.

Customer files
turnigy-multistar-esc-manual.pdf Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!