Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.
The 4225-610 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.
These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.
Lipo cells: 4s
Max Surge Watts(W): 330
Working current: 16 amps
Max.current(10s): 22 amps
No Load Current: 0.3 amps
Intemal Resistance: 0.091 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Purchases 4 of these for a 600mm wheelbase quad they mount just right they should, they are very nicely balanced no vibrations or noises coming from whatsoever, would recommend to someone for a quad. I myself use them with 12x4.5 slowfly props but will be trying 12x5.5 cf/13x5.5 cf to see which I like better.Gute Motoren in Top-Qualitt.
Gestern erhalten, verbaut und einen Testlauf gemacht.
Achtung die Kabel sind ca. 50CM lang, der HK Support sagte was von 7-8cm.
good motors with awesome build quality.
received them yesterday, made the motorswap and did testrun. great...
Attension...the wires are close to 20 Inches long. HK Support told me 3 inchesReal improvement over my last motors. Getting just under 30 minutes flight time on a 470, 12 inch props, 12000 4s battery, 2kg all up weight. Which is great considering the lowest altitude I launch from is 5000 feet.Terible ce moteur, souple conome en nergie mont sur dij f450 hlice de 12x4.5 lipo de 4500mah 35c temps de vol 18-20 mm :)These motors work excellant on my 680Pro! I wish they sold replacement prop adapters. After an operator error crash, I smashed three of my 6 motor shafts. I guess a fifty foot drop onto concrete will do that sort of thing! :/ Until they sell replacement adapters, I'll just have to keep buying new motors until my skills improve.
Motor seems to be of a good quality. Ordered four. tested one so far with a 3s batt, slight vibration at idle but almost nothing when given the littlest bit of throttle all the way to full.
The item pictured here, isn't what you get, check in the international version to see what you get.
The weight of the motor is also very off, as it weighed 120g with the long motor wires attached, and prop cone prop mounts.
Length of the attached motor wires came up to 24 inches.They now are sending a new version of motors.
Unlike the pictures above, the motor can's colour is now green and the motor housing
design is improved. The motor mount holes variable become reduced and they come with
extra long motor wires. They are great motors, quite balanced and precise.Haven't flown it yet so not sure about the quality but this motor also comes with the T prop adapter (more likely a washer) for the top which the item desciption didn't mention. Looks very solid and strong. Bearings are much larger than NTM motor series.Brilliant motors! Had to cut the little 5th arm off the motor mount for it to fit my Predator 650, but now they just rock! 4s 5000mah 30C, 30A afro's and 12x5.5 carbon props. Great motor for the money!Finally a top quality motors for my Tarot 680 pro hexacopter. Very well balanced, nicely finished, and best of all, excellent performance and power. I'm very happy with them so fat. i have tried them with a 12x4.5sf props, 4s and 30A afros, I get around 10 minutes flight with this setup.
No File Name download now [113kb] thrust with 4s and 12x3.8 prop download now [34kb] Multistar-4225-610_Prop_Tarot680_2014-10 download now [473kb] Multistar-4225-610_parts_2014-10 download now [453kb]