More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 25C Constant / 50C Burst
Weight: 60g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: XT60 (Battery is too powerful for a smaller plug, must use XT60)
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
great little battery nice and light weight at only 60 g. I use it for my video goggles and receiver. hours of fun time, easy on the neck ;) I recommend it.Very good battery for my little Yak-54 and some coaxial helis like the Reely Lama. This battery has a good punch and gets only slightly warm at discharges around 10 - 15C.very good battery use it for hsp 1/18Awesome little battery. Perfect size to strap under my scorpion mini y4. It also works great in my 1/16 rock crawler. Plenty of power for a small multirotor or rc car.Nice battery pack (Small size and still a desent ammount of power). I Have used it for a Magpul PDR-C airsoft gun. And It fit's in the battery compartment without the grip extender! And this is one of the only battery's that fit (without costing above 15$plus) and still have that many AMP's :-) .... My airsoft gun fired with no problems for 2 hours and I'm extreamly trigger happy, so i may hold up longer for normal airsoft players...
Recomendations: One is not enough to power an airsoft gun for an entire day. So get 2-3. I personaly have 3 and that's enough for an entire 6-7 hour airsoft day...
5 stars from me (Because it's one of the few battery's that fit in an unmodified magpull PDR)..
For usage with other airsoft guns (that can take bigger batteries) i would only give it 4 stars and recommend you to get a larger one with more AMP's ...J'ai mis une note trs basse, car concernant les autres batteries que j'ai dj acheter sur Hobbyking, celle-ci n'tait pas fonctionnelle, en prenant les mesures adapte, j'ai "dballer" celle ci pour finalement me rendre compte que le connecteur faisant la liaisons entre les deux batteries tait "casse", donc impossible d'utiliser celle ci.
Problme de fabrication ?Je souhaiterai que ces petites LIPO soit quipes de vos nouveaux connecteurs XT 30 (prvu pour 30A) et pas des XT 60
MerciI use this pack for my Skyzone FPV goggles and there size and capacity is ideal for the purpose. I use a power supply type plug that is on the skyzone goggles to XT60 adapter that I use on all my LiPos so I can use my normal packs too.Work really well on the micro quad. I have x3 and getting around 6-7 mins flight time. They pack loads of punch too! "Flippin' great!" ;-)Good quality and nice weight!