When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.
The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!
Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!
Voltage: 2S1P / 2S Cell / 7.4V
Discharge: 15C Constant / 25C Burst
Weight: 68.1g (including wire, plug & case)
Dimensions: 125x6x20mm (Each)
Discharge Plug: Mini-Tamiya (Mini Molex)
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard .
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology
*The length of balance charging wire may vary
Unit Weight (g)
Max Charge Rate(C):
perfect fit and capacity, using them in an airsoft tm recoil shock rifle. they fit nice in the butt stock with the battery mod to take normal lipos, they also fit snug inside front wired TM socom and hk416 rails, you can machine the outer barrel to make it fit easier if needed.Works very well on a DSR rifle, don't take any space, and fits EVERYWHERE!Purchased 2 of these batteries to use in my Magpul Masada PTS. I built a Parallel adapter and was able to fit both batteries (All four cells) in the railed hand guard. This battery design is ideal for AEG's with tight spaces for batteries. I have been able to use these battereis in setups I normally need a PEQ box for. They also fit in Buffer tubes for AEG's wired to the rear. The ability to use them parallel in my Masada gives me the option of having 1200mah or 2400mah and still have some extra space left.
Affordable on any budget
Lipo power in a small package
Great trigger response
One battery is ideal for one day of play for me, but the 2 of them together ensures I have shots left for a prolonged day of play. Each unit takes about 10-15 minutes for a recharge with the charger set at 1.2amps.cool battery, not too useful as a separate packages, buy the single package instead