More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 25C Constant / 50C Burst
Weight: 124g (including wire, plug & case)
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
Got 2 of these as my first batteries for my 250 quad. Getting a solid 25min of easy flying.Great batteries: Nice size, form, weight and performance under load.
Internal resistance of both my packs fully loaded (4.2V per cell): 4-5-6 and 4-6-5 mOhm.
I did not test the 5C fast charger yet, but I believe it will work just fine. Thus slightly lowering the lifespan of the pack.Nice lightweight batteries - works well on my 235 quad and 2204 2300kv motorsGood battery, used many time now. Would recommend.Using these on an Eachine 250 Racer, longer flight times compared to same 1500mAh I used before, just as light and can't fault them, bought 6 of these and all working great. Would buy more.Excellent flight time.good lipo, very stable.I have used the Turnigy Nano-tech batteries in various sizes - 2 cell and 3 cell, with various Mah ratings and find these have a significantly lower internal resistance that a lot of other brands of batteries. There is a noticeably increase in power on take-off and also, inflight. The price has increased over time but they are still a good buy. I just wish they would supply them WITHOUT any plug on the end. I have to always cut off the plug to put on a Dean's Ultra Plug.Best Lipo EVER! With these batteries my ZMR (1806 2280kV 5030 props) has an uptime of 12:22 mins in rude flightmode (v-alert @ 3,4V) With FPV equipment these batteries reach up to 10:08 mins before 3,4V voltage alert comes up!
I recommend a strong BUY 4 all 250 FPV miniquad owners out there!ottima batteria, durevole