More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 65C Constant / 130C Burst
Weight: 124g (including wire, plug & case)
Dimensions: 104 x 35 x 16mm
Balance Plug: JST-XH
Discharge Plug: XT60
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
Excellent race pack for the 1/14th vehicles I race . Perfect fit losi mini buggy and my new tacon sct4x4 . Lots off punch for clearing the big obstacle. I have been recommending these to everyone that race hard core 1/14th.great deal, lots of power and last alot longer then the other brands.. i have many of this pack and will keep getting morethis pack works in a F5D Pylon in combination with a 3s pack!!!! They fit...... yeah its official these fit the 1/16th mini erevo with slight door modification for wires. I have 2 2.25 2s on the way im hoping those fit as well.
awesome simply awesome very punchy full capability of supplying my mamba max pro and castle creations cm-36 with tons of juice easily meeting the 40amp-100amp requirement
Downside well its 1.8 and i drained it in like 15mins or less will officially time tomorrow but that was 15mins of sure power and atleast 12 1/4 mile drag runs a little backyard dirt bashing. I cant wait to get the second one in so i can run them in parralell and have 3600 mah. I originally order just one of these as i was nsure they would fit and the 2.25 i wanted were on backorder. Since it fits i just ordered another and ill use these while the 2.25 charge..:)
now im on a mission to find some nice 3s that wil fit my 1/16 stock venileon merv.
oooh the power cant wait till the suncomes back up. I ned a lightbar haha
Have only done a few flights so far, but results are looking very good. Quite impressed by the voltage under load. Using them in an F5B glider (at 10S) and getting over 3.6V/cel at over 150A load (short bursts), which is excellent! Even better than the Turnigy 40C, which are already quite good. Will report later how they hold up over time.I love nanotech!!
This can fit in turnigy 1/16 beetle