More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 25C Constant / 50C Burst
Weight: 133g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: XT60
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
The dimensions are not correct on the website. Other reviews said it fit the mini revo so I risked it. They were not wrong, Great little battery for my Merv. *will need battery door mod*Been using these in Losi MRC's for a while now,couple of battery straps and your ready to go,for lot longer than stock Losi batts..first time i order this battery to try compare to other battery i have .i do have battery the same volt and AMH and the same 25 i did order nano tech to try the result both battery same result but the battery i have the cheap one lighter 15gram than nanotech its ok but good priceGreat lipos, great price, got loads of these! thanks a lot HK!Fits perfectly in mini E revo but the cables have to be forced.PERFECTAS PARA CUALQUIER COCHE 1/16 1/18 DRONE Y OTROS DURACION Y PESO LIGEROThese batteries will be used in an original Easy Star. The have a lot higher output than other batteries I have used in the same size. They give 10 to 20 percent better launch power than anything else I have used.. They are a lot cheaper than anyone else for this quality of battery.. I have used Turnigy nano-tech batteries for quite awhile now and they same to be better that ones that cost 2 to 3 times as much.Love this battery. Works flawless in my Traxxas 1/16 summit. No puffing and loads of power. I defenetly recommend this battery, and at the price who could argue more.Good battery. Use it for receiverI have 4 of these Nano-tech 2200 mah. Lipos. They arrived in perfect condition and charged and balanced right at storage rate. Impressive, they are primarily for my 1/16 Mini Rally from Turnigy, but I run them through my 1/10 SCT as well just to watch it wheelie down the road the odd time. I'll be getting more of these in the 5000 mah range for the truck. Five star all the way.