Country
United States
 
Shipped From:
  • UK
  • US (West)
  • US (East)
  • AU
  • EU

Turnigy nano-tech 2500mAh 3S1P 5~10C Transmitter Lipo Pack (Futaba 6EX and 3PKS)

Turnigy nano-tech 2500mAh 3S1P 5...

Suitable for Futaba 6EX and 3PKS transmitters.

Typically reserved for high amp draw performance applications Turnigy nano-tech batteries represent the pinnacle of performance, reliability and value for money. Taking these same manufac...
9210000037

Now save save $0.00 $0

$16.95
224g
9210000037


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

Suitable for Futaba 6EX and 3PKS transmitters.

Typically reserved for high amp draw performance applications Turnigy nano-tech batteries represent the pinnacle of performance, reliability and value for money. Taking these same manufacturing principles and technology, our engineers crafted a line of transmitter specific LiFePo4 batteries for those seeking dependability, quality and life cycle unequalled by any other battery on the market today. When quality counts go with the worlds most trusted performance battery, Turnigy nano-tech.

*Note: This is a Lipoly battery. You will need to use a Lipoly compatible battery charger when charging these batteries. NEVER attempt to charge these batteries in your transmitter unless the transmitter is specifically designed to charge a Lipoly battery. 

Spec.
Capacity: 2500mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 5C Constant / 10C Burst
Weight: 155g (including wire, plug & case)
Dimensions: 106 x 50 x 14mm
Balance Plug: JST-XH
Discharge Plug: JR & Futaba

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Kv(rpm/v)
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch):
    No
  • Max Currents (A):
    No
  • Power (W)
    No
  • A(mm)
    No
  • B(mm):
    No
  • Length B (mm):
    No
  • Can Length D(mm)
    No
  • C(mm)
    No
  • D(mm):
    No
  • Max Voltage(V):
    No
  • E(mm)
    No
  • Shaft A(mm)
    No
  • Diameter C(mm):
    No
  • F(mm):
    No
  • Total Length E(mm)
    No
  • SKU
    9210000037
  • Weight(g):
    224.00
  • Length:
    104.00
  • Width
    14.00
  • Height
    50.00
  • Capacity (mAh):
    2500.00
  • Discharge(c):
    5.00
  • Length-A(mm)
    106.00
  • Height-B(mm)
    50.00
  • Width-C(mm):
    14.00
  • Unit Weight (g):
    155
  • Max Charge Rate(C)
    2.00
  • Watt Hour
    27.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Well packaged as always, good quality, and most importantly, even with the leads it fits absolutely perfect in the battery tray for 8 AA batteries. I just replaced the AA batteries in my FlySky FS-T6 with this battery in just half an hour or so. Just cut the original wires and put in a JR connector and you´re done.
GOT TWO OF THESE AND PUT THEM IN MY FUTABA 3VCS AND MY 3PKS TXS. MADE A HUGE DIFFERENCE OVER NICDS. GHARGES QUICKLY AND LASTS AGES. THANKS HK.
I used this in my Flysky GT3B, it's a really light battery pack when compared to AA. Lasts forever. Recommend anyone to convert their transmitter to Lipo, does require some soldering though.
s'adapte parfaitement a ma futaba 6ex

que du plus par rapport au piles rechargeables
Ordered this battery for my FlySky FS-T6 and it fits perfect. Modified the battery connector so I could remove battery for charging. Battery does not rattle or move within battery compartment. I have two transmitters setup this and plan to order a spare battery.
I used this battery for a flysky fsgt3b mod. It fit perfectly after removing the exsisting battery tray. I had it on for over a hour last night and it never even dropped in voltage. Great battery
Snug fit in futaba t3pks
Good balanced battery, fits nicely in my robbe Futaba FX-18. Had to cut off the Futaba connector to replace it with the old style connector from the FX-18 (from discarded original NiCd). Kept the JR plug for charging purposes. Must adjust the voltage warning, it will not match using this battery!
I too installed this in my airtronics m11.... Item fit perfectly and does not move around. No alarms or error messages. I would not recommend recharging in the transmitter. Besides having to remove for charging the item is great and recommended for anyone!
Awesome battery, it lasts very long.
View all reviews
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.