More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!
Unlike other batteries, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
This particular battery has a 2-pin Molex connector. Please refer to the attached image as this Battery has the "A" plug polarity. Please make sure this battery suites your connection. The wrong polarity will damage your electronics.
Voltage: 1S1P / 1 Cell / 3.7V
Discharge: 20C Constant / 40C Burst
Weight: 9g (including wire, plug & case)
Dimensions: 34 x 20 x 7.5mm
Discharge Plug: JST-DS Losi 2-Pin Connector
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
Replace my Walkera QR LadyBird and WLToys V202 stock battery,
Punch a little bit better. After the flight battery a little slightly warm, please wait for 5 to 10 minutes to recharge, if a higher C rate just perfect.
Flight time: Indoor: Over 8 minutes, Outdoor: 5-6 minutes ~ Very Nice ~
RecommendJust check the polarity with battery you are replacing... those molex come either in right way, or reversed... Either way, it's easy to replace the leads - just use a small screwdriver, make sure you don't short them or you will have fireworks...
Battery has very good punch, on 40g drone (incl. battery) it flies better than stock 270mAh non-name battery. The punch is tremendeous, while the stock battery allowed drone to hover, and make basic manovers, this makes it just jump. Also battery life time is great. about 7m of quite agressive flying (4m on stock).
Can easily be charged at 2C.
The dimensions are about 1-2mm smaller than stated on the site, so they nicely fit into those 30e drones you can buy in local stores.A friend loaned me his Turnigy nano-tech 750mAh 1S to try in a smaller park-flyer I have and it was too large. He suggested I stick with the 300mAh 1S so I purchased this LiPo battery which has dimensions close to the one I have. I purchased it strictly based on the size, but since I have used HobbyKing's nano-tech batteries before, and I have been very pleased with them, I expect nothing less from this battery. Nano-tech LiPo's are a wise choice over standard LiPo's for performance. A WORD OF CAUTION: always check the polarity of the LiPo battery leads to be sure they match the polarity of your application. If they don't, then carefully change them ( one lead at a time ) so that they do. NEVER short the leads ( touch the two leads together ) if you have to change their orientation on the connector ( in this case the Losi connector ).Turnigy Nano Tech lijpo's hebben een goede reputatie. Deze lipo kan dat alleen maar bevestigen. Inmiddels al heel wat vluchten met een Hubsan X4 (ca. 50 stuks) mee gemaakt en bemerk nog geen achteruitgang. Lipo's zijn lichter dan de standaard lipo's van Hubsan. Hierdoor worden de vluchteigenschappen ook beter. Bovendien een grotere capaciteit. (300 mah t.o.v. 240 mah) De prijs is ongeveer een derde van de Hubsan lipo. Advies; gebruik wel een goede lader i.p.v. een USB lader van bedenkelijke kwaliteit die vaak standaard wordt meegeleverd met je toestel.
Ik ben er in ieder geval zeer tevreden over en heb er inmiddels nog een aantal bijgekocht. Voor de prijs hoef je het niet te laten.Used on hubsan 107D.
5 minutes flight time, much better than original 380mah lipo on the drone.
Bought two. While both will take over 300mAh, one of them has such high IR that voltage jumps almost immediately to 4.2V while charging, and sags under load.