More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 25C Constant / 40C Burst
Weight: 31g (including wire & plug)
Balance Plug: JST-XH
Discharge Plug: JST
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
This has been a great little battery for my Brushless Superfly Plane, "Park Flyer". It last for a good flight and is so light that performance is exceptional. I have stored them in my garage on a regular basis and usually charge it at about 5A. These batteries have lasted me over 2 years and am just now getting some puffng. So I am ordering more!Great little battery. I'm using it on a RotorX Atom.We fly these in our Skyfighter (Hacker), Indoor Edge and Clik (Rc-Factory) they each have over 100 of flights and still enough power after 2 Seasons Indoor flying. Really good cells!Quite nice lipos with a decent punch.ideal pour nos avions indoor, grosse puissance et bonne patate lors de remise des gaz brutalement.
j'en suis fan et je le recommande sans soucis, une valeur sur.this battery is awesome ran one pack though it before it leaked on me, getting it replaced but these things happen across all lipos. I put this i my Mini Breeze and with that 25-40C awesome power setup for my plane and alot more planes. it light cheap more power, but you only get 460mah which is fine my plane fly's for 20mins with this so the low mah isn't much of an issue.Nice Lipo, C-Rate a Little bit to high, but for shocky erfektused in my hobbyking galaxy for 4-5min flight time
just good lipoAwesome battery for the price. Why bur expensive lipos when these have the same qualitygreat quality battery for indoor 3D planes