More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 65C Constant / 130C Burst
Weight: 304g (including wire, plug & case)
Dimensions: 151 x 48 x 19mm
Balance Plug: JST-XH
Discharge Plug: HXT-4mm
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
Hi, here is a review of this battery. the batteries charge up great all the cells are matched dead on, and that is good news for us battery freaks. for these batteries as of now I have not seen any issues and the temps are great. I run these in a Arrma Typhon 6s but only of 4 cells with these batteries and they barely get hot. maybe it is because of the 65c to 130c burst rating. also I have ran these on a 1800kv brushless inrunner on my lucus oil catamaran and also in my revolt 30 all made by aquacraft and they run just a 60 amp water cooled esc and again no issues so far on these batteries. not a whole lot to say but it might help somebody wondering if they overheat or get hot from running on equivalent systems like mine. thanks and have a great day!Great Battery pack for the money!! powerfull enough to supply any 1/10 scale rc car!!!Ive bought at least 6 of these packs so far, 1 has been ok.
Find another brand of pack these are utter rubbishexcellent pour le f5b
il rentre facilement et ne prend pas trop de placeBought 2 for my pro boat mystic rc boat. They fit no problem, infact you could go bigger. At end of a 10 min run they were luke warm not hot, and performed beautifuy. I have many other nano's, and would have to say they are my favorite for the $.I purchased 2 of this battery for my savage flux and i really like them. The build quality is very good. My savage flux is powered by xerun esc. After installing this battery the truck run very smoothly not like before the truck will has some cogging but now it start very smoothly. I guess thats because of this battery better discharge performance.very good. will buy more when i have the money :D