Turnigy nano-tech 5000mah 5S 45~90C Lipo Pack
Turnigy nano-tech 5000mah 5S 45~90C Lipo Pack
Copy and Share the Below URL
More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Spec.
Capacity: 5000mAh
Voltage: 5S1P / 5 Cell / 18.5V
Discharge: 45C Constant / 90C Burst
Weight: 715g (including wire, plug & case)
Dimensions: 161x50x44mm
Balance Plug: JST-XH
Discharge Plug: 4mm bullet-connector
Suited to the following models:
5S x 2: MIKADO LOGO600/600SE, Century Swift 620SE, Synergy E9, HIROBO Eagle3 EP
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
-
Capacity (mAh) 5000.00
-
Discharge(c) 45.00
-
Max Charge Rate(C) 10.00
-
Length-A(mm) 161.00
-
Height-B(mm) 50.00
-
Width-C(mm) 44.00
halcon | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Jan 18, 2012
Eddie | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Dec 20, 2011
Crocco | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Dec 15, 2011
Jason | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Dec 08, 2011
Michael | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Sep 01, 2011
Mark | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Aug 09, 2011
baytacoglu | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Jun 13, 2011
Customer | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
May 16, 2011
Customer | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
May 14, 2011
Extra 260 | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
May 01, 2011
