United States
Shipped From:

Turnigy Reaktor 300W 20A 6S Balance Charger

Turnigy Reaktor 300W 20A 6S Bala...

Big power in a small package! the Turnigy Reaktor 300W charger is one of the most powerful chargers we have ever seen for its size. This high power balancing charger/discharger can provide up to 20A charge rates and handle up to 6S Li-poly/LiFe or...

Now save save $0.00 $0.00


Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


Big power in a small package! the Turnigy Reaktor 300W charger is one of the most powerful chargers we have ever seen for its size. This high power balancing charger/discharger can provide up to 20A charge rates and handle up to 6S Li-poly/LiFe or 17S NiCd/NiMH accurately. Not only does the Reaktor 300W offer a super high charge rate capability, it also boasts great features such as storage charging, cyclic charging/discharging, 10 charge parameter memory and high power balancer.

The Turnigy Reaktor 300W is an all-in-one power house charging solution for your R/C models' batteries.

• Microprocessor controlled
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing charge & discharge
• Li-ion, Li-poly and LiFe capable
• Ni-Cd and NiMH capable
• High-power and high-performance circuit
• Store function, allows safe storage current
• Data storage (Store up to 10 packs in memory)
• Cyclic charging/discharging

Input voltage: 11~28V DC
Charge current: 0.1~20A
Discharge current: 0.1~20A
Maximum charge capacity: 300W
Maximum discharge capacity: 20W
Maximum regenerative discharge power capacity: 300W
Current drain for balancing Li-po: 350mAh/cell
Lithium (Li-poly/LiIo/LiFe) battery cell count: 1~6 series
NiCd/NiMH battery cell count: 1~17 series
Pb battery voltage: 2~24V
Battery setup memories: 10
Intelligent temperature control: Yes
Weight: 350g
Dimensions: 140x95x27mm

1 x Turnigy Reaktor 300W charger
1 x Alligator Clip Charge Lead
1 x Charge Lead - No Connector

*Note: Power supply not included.



Additional Information

  • Blade Count:
  • Diameter X(Inch):
  • SKU
  • Watt Hour
  • Weight(g):
  • Length:
  • Width
  • Height

Write Your Own Review

Only registered users can write reviews. Please, log in or register

From an imax b6 mini to this one - very positive.
Very good quality, feels much more exact than my old charger. Fast too. The fan is OK and takes a long time before it sets in.
I use it with a parallel board without issues and really recommend it.

The only (minor) downsides so far
- buzzer is way too loud. Easy to solve by opening up the side and covered it with some double sided tape
- the buttons on the unit are somewhat hard too press. I hope they will work in the long run
I have this charger about a month now and it is a little powerhouse.
To reach the full potential of this charger you need a power supply that can go up to 24 volts it reaches full 300w at 18v and higher.
It has a ton of features and can discharge with a external discharge bank.
I wish turnigy will make a wider range of these chargers like the icharger 406b or 4010 duo.
Overall a good charger for a great price.
So far it's doing much better than my Skycharger 6200 which I've used for about 4years!
Neither a 300W nor a 20A charger ! The power limit in 4S seems to be set at 230W (14.7A 15.7V right now). At this load, it only uses 250W. Good point : a 300W power supply is probably enough.
Otherwise the charger is good, the balancing is good, the voltage measurement also, it's nice to have an IR measurement to know about your lipos and it's much smaller than it looks on the pictures. Also, the fan seems to be regulated properly so it's not noisy if not required.
But the specs are lies, don't count on 300W of charge.
leider nur billige folientaster, aber sonst werden auch 4s lipos mit 16A geladen.

bin zufrieden mit dem reaktor
Came to Sweden in two days! Really happy with the shipping. Came in perfect condition and it feels like it will keep up for a long time.
had this about two months now. it's just incredible. totally worth the money! compact size, not too loud (except the beeping). it goes through multiple batteries a day and daily discharging and it does not even get hot. i can strongly recommend this.
Unbelievably awesome charger for the money. I have not had any issues whatsoever with it. At 20Amps and 300 watts, I have been able to charge 2 of my 6S, 3000mAh lipos in parallel at 2C with no issues. Just about 12Amps. Great buy.
Still going strong after 1,5 years with 2 units of the 300W / 20A Reaktor. Also ordered the 250W / 10A version on last cyber-deals for such a low price I could not resist.
Habe den lader jetzt schon einige Zeit und ich bin sehr zufrieden!!!
Der Balancer ist Top .
Schn klein kann ich nur empfehlen.
beschreibung und menue ist identisch mit dem iCharger 206B
Der Reaktor kann 100pcnt mithalten .
Kaufempfehlung ja fuer den Preiss top top top
View all reviews
Upload video

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.