Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy RotoMax 100cc Size Brushless Outrunner Motor 167kv

Generating Links

Turnigy RotoMax 100cc Size Brushless Outrunner Motor 167kv

Price:

Now save save $0.00 $0.00

$429.99
QTY:
Shipped From:
  • USA
  • Global
Already Purchased
Status:
In Stock
SKU:
MAX100
want FREE shipping? Click here to find out more!

Upgrade your 100cc size gas engine model with the Turnigy RotoMax 100cc Brushless outrunner motor. This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of fuel.

When combined with a 12s Lipoly battery, 27x12 Propeller and a 250Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.

This motor is specifically suited for carbon fiber & wooden propellers and features an IC style 6 bolt hole design. The shaft has also been tapped to suit a 5mm bolt to make fitting a spinner of your choice easy.

Spec.
Battery: 12 Cell / 44.4V
RPM: 167kv
Max current: 170A 
Watts: 7992w
No load current: 44V/4.5A
Internal resistance: 0.021 ohm
Weight: 2074g
Pole Count: 24
Diameter of shaft: 10mm
Suggested ESC: 250A 12S Compatible
Suggested Prop: 27x12

  • Kv(rpm/v) 167.00
  • Max Current (Motor) (A) 170.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 44.00
  • Power (W) 7992.00
  • Shaft A(mm) 10.00
  • Length B (mm) 114.00
  • Can Diameter C(mm) 110.00
  • Can Length D(mm) 53.00
  • Total Length E(mm) 150.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Rotomax 100cc Motor
  • My Electric Paramotor Back Test
Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Rene | Verified Buyer

  • Quality
  • Overall
  • Value

Great Motor

Apr 08, 2021

I am pushing this motor to its limits, 14s - 10,000mA with a 26 x 12 Falcon prop. Just gets warm, nothing to worry about. It is a super piece of work.

Sandrine | Verified Buyer

  • Quality
  • Overall
  • Value

Great Motor!

Aug 29, 2018

Running a 28 x 10 prop limited at 6000 RPM just gets warm, seems to have no problems at all!
12s 10000 mAH but as paramotor so full out then up and down after that. Using Fatboy 300a also seems fine, just warm.

Ace Daniel | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 26, 2014

Fly him in my 2,7m Edge 540 V3 from Black Horse. 12s 16000mAh Multistar, Prop 28x10 Mejzlik, ESC Delux250. Flying time near 15 Minutes

TRANSIT | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 15, 2014

Fitted this motor in my sukhui 2.6m with delux 250 amp esc very smooth power control nano tech 12s/5000 65/130 prop 27/10 excellent

william | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 07, 2014

I am running this motor on a 100cc aeroworks extra 300, setup is rotomax 100 with 27x12 xoar cf prop, 300 amp alien systems esc, 4 x 6s 5300 mah batteries. A 6 minute flight with hard aerobatics uses only 6200 mah out of 10600 mah. I have timing set to 22 degrees and pwm at 8khz. I might try 25 degrees but everything is very cool to the touch after the flight. this could possibly use a little bigger prop as well. like a 28x12 plane flies great and power is just right for 3d and aerobatics.

ananasbrus | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 12, 2013

I am using the motor in a 33pcnt Pitts Python that has been converted from gas, and this works very well.

The rest of the setup is a Xoar 28x10 prop, 12S2P Turnigy Nano-tech 45C 5000mAh batteries and a MGM-Compro X-series 250A controller. This combo pulls 165A and I get 6300rpm on this prop, thrust is plenty good for the aircaft. I can fly hard aerobatics for 6 min. with a good reserve on the batterypack after landing, and the motor is not even warm after such a flight. Very happy with the motor so far!

sven-09 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 10, 2013

Before this engine I can only warn! Looks pretty professional, its quality is rather poor! The coils are wound in cross directions, and the connection wires are not properly tinned. Burned my motor controller therefore has 2 HobbyKing has the motor is replaced, the controller is not. Financial damage -
2 x Controller $ 230.88 postage $ 61.06 new controller damage to the model!
Registration of complaints HobbyKing = 5 months!
Complaint, the controller = no answer!
And all this for $ 53 orders of more than $ 10,000 purchase price!

Monte | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 23, 2012

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far. The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

Monte | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 23, 2012

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far.

The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

Monte | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 23, 2012

I just got back from flying a homemade paramotor powered with this motor. It has plenty of thrust! I was able to climb at a good rate with a 27X10 prop. I weigh 165lbs so I think this is really great. The motor seems great so far.



The monster 2000 ESC is running too hot so I think I will have to step up to a larger ESC. It also cuts out at half throttle. Not a good match for this motor.

Customer files
Dimensional Drawing Download [80]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories