Turnigy 50A Skateboard ESC For Electric Conversion (w/BEC)
Turnigy 50A Skateboard ESC For Electric Conversion (w/BEC)
Copy and Share the Below URL
The Turnigy 50A skateboard ESC is a highly modifiable electronic speed controller designed with DIY Electric Skateboards in mind.
The Turnigy Skateboard ESC allows you to use sensorless motors to achieve smooth start-up from a stop versus traditional RC ESC's which may have trouble starting from a complete stop. It also provides strong. reliable and progressive electric braking.
You can connect your ESC to your computer and modify the using the VESC BLDC Tool. Our ESC ships to you tested multiple times during the production cycle and is ready to use. The ESC will provide optimum performance when configured for your particular motor and battery voltage. Please refer to video in Benjamin website (http://vedder.se/2015/01/vesc-open-source-es-c/) to get more Information and download the PC software.
Features:
• Regenerative Braking
• Sensored and sensorless (FOC) Field Oriented Control allows your electric skateboard to run with barely any motor noise
• Many safety features such as current control and temperature control features
• Great start-up torque with sensorless motors
• v4.10 Hardware
• Latest v2.18 for Firmware for FOC (Latest firmware version}
• Bootloader and Firmware Loaded. With Motor Detection & FOC Tested
• 10awg motor wires w/ 5.5mm bullet connectors
Specs:
Amps: 50A continuous / 130A peak
Cells: 3-12S LiPo
Voltage: 12.6-60V
BEC: 5V@1.5A
BEC type: Internal driver support
Timing: Software calibration
Cutoff Voltage: Programmable
Frequency: PWM input
Governor: No
Weight: 80g
Size: 60x40x20mm
Programming card: No
Reverse: No
VESC Hardware by Benjamin Vedder is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Turnigy 50A VESC Manual | Download [5] |
| bldc_tool&fw_donload location | Download [292] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!
