Turnigy TrackStar 1/10 17.0T 2400KV Brushless
Turnigy TrackStar 1/10 17.0T 2400KV Brushless
Awesome!
Copy and Share the Below URL
TrackStar 2400Kv (17.0 Turn) sensorless brushless inrunner to suit 1/10 scale cars.
Specs:
Kv: 2400
Max Voltage: 21v
Max current:24amps
Watts: 550
Resistance: 0.0442Ohms
Max RPM: 50000
Length:50mm
Diameter: 35.8mm
Shaft dia.: 3.175mm
Shaft length: 15mm
Weight: 168g
-
SKU 9052000042
-
Brand TrackStar
-
Shipping Weight 246.0000
-
Length 144.00
-
Width 52.00
-
Height 117.00
-
Kv(rpm/v) 2400.00
-
Max Current (A) 24.00
-
Resistance (mh) 0.00
-
Max Voltage(V) 21.00
-
Power (W) 550.00
-
Shaft A(mm) 3.18
-
Length B (mm) 50.00
-
Diameter C(mm) 36.00
-
Can Length D(mm) 33.00
-
Total Length E(mm) 65.00
this motor is great for the price, works fine on my 1:10 car
this motor is great for the price, works fine on my 1:10 car
Nice buget motor - use in 1/10 buggy - LIKE
Nice buget motor - use in 1/10 buggy - LIKE
Instaled it in to a Axial SCX-10 with a Castlecreation Sidewinder3. Much torque amd a smooth start even if ist not sensored.
Instaled it in to a Axial SCX-10 with a Castlecreation Sidewinder3. Much torque amd a smooth start even if ist not sensored.
a little bit light in 2s lipo for 4wd buggy
a little bit light in 2s lipo for 4wd buggy
good job!!!!!! and very nice~~!
good job!!!!!! and very nice~~!
I used this with a 3S Lipo to power a weapon in a 12 pound (5.44 Kg) battle robot (via pulley) and it did a magnificent job! Recommended!
I used this with a 3S Lipo to power a weapon in a 12 pound (5.44 Kg) battle robot (via pulley) and it did a magnificent job! Recommended!
I orderd this motor for my tamiya dt02 but was somewhat hold back in doing so,but i recived it 1 month after ordering in perfect shape.Motor itself was packed nicely in a box with foam.
Looks very well and none of the things i have read about it could have been found on mine.
I am using this on a 60amp hobbywing esc and no cogging what so ever.Installed it in my tamiya and used a 2S lipo and my tamiya was like a rocket very powerfull and was doing wheelies like crazy.Gives more power then my 3000kv set in the same kind of car.
These low kv motor work very well in oldschool tamiya cars where you want brushless power but no insane kind of power.
I orderd this motor for my tamiya dt02 but was somewhat hold back in doing so,but i recived it 1 month after ordering in perfect shape.Motor itself was packed nicely in a box with foam.
Looks very well and none of the things i have read about it could have been found on mine.
I am using this on a 60amp hobbywing esc and no cogging what so ever.Installed it in my tamiya and used a 2S lipo and my tamiya was like a rocket very powerfull and was doing wheelies like crazy.Gives more power then my 3000kv set in the same kind of car.
These low kv motor work very well in oldschool tamiya cars where you want brushless power but no insane kind of power.
Motor has an insane amount of power
Motor has an insane amount of power
Motor works well in a vintage kyosho outrage at 2s. Gets a little warm but not to hot. BUT change these cra ppy plugs. I already ordered a Leopard motor, which is the same, with the same cra ppy plugs. If they are easyly beeing turned plugged in, then they are cra p.
Motor works well in a vintage kyosho outrage at 2s. Gets a little warm but not to hot. BUT change these cra ppy plugs. I already ordered a Leopard motor, which is the same, with the same cra ppy plugs. If they are easyly beeing turned plugged in, then they are cra p.
Parfait dans un trooper sct 1/10 en remplacement, mais il faudra rduire le pignon moteur , sinon le moteur et esc chaufferont .
Parfait dans un trooper sct 1/10 en remplacement, mais il faudra rduire le pignon moteur , sinon le moteur et esc chaufferont .
Combine Essential Items and Save
Related Products
-
HobbyKing™ Brushless Car ESC 2S-4S 60A w/ ...SKU: HK-60A
$28.55 -
Alloy Motor Heatsink w/Fan Mount for 36 Si...SKU: HS36BOLT
$4.43