Country
United States
 
Shipped From:

Turnigy TrackStar 1/5th Sensorless Brushless Motor 760KV

Turnigy TrackStar 1/5th Sensorle...

The Turnigy TrackStar Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality CNC motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better price...
9192000069

Now save save $0.00 $0.00

$153.60
OUT OF STOCK
1512g
9192000069

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

The Turnigy TrackStar Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality CNC motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else!

This TrackStar brushless motors make a great upgrade for 1/5th short course trucks, monster trucks, buggies or anything else that uses 55 size motors.

Features:               
• Compatible with any Sensorless ESC
• CNC Machined Billet T6 Aluminum Motor Can  
• High Purity Copper Windings
• Removable/Replaceable Rotor       
• Powerful Sintered Neodymium Magnet    
• Precision Engineered for Maximum Energy Conversion

Specs:
Size: 53.5x114mm
RPM/v: 760kv
Poles: 4
Max voltage: 30V (8S)
Max Current: 160A
Max Watts: 4800W
Resistance: 0.011ohm
Shaft Size: 12mm
Bolt hole spacing: 30mm x 4, M4
Can Diameter: 53.5mm
Can Length: 114mm
Weight: 1143g

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    9192000069
  • Weight(g)
    1512.00
  • Length:
    185.00
  • Width:
    70.00
  • Height
    100.00
  • Kv(rpm/v)
    760.00
  • Max Currents (A):
    160.00
  • Power (W):
    4800.00
  • Length B (mm)
    113.00
  • Can Length D(mm)
    107.00
  • Max Voltage(V):
    30.00
  • Shaft A(mm):
    12.00
  • Unit Weight (g)
    1143
  • Diameter C(mm)
    58.00
  • Total Length E(mm):
    149.00
  • Resistance (mh):
    11.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

got 3 of these motors and tested them with trackstar 200amp esc at 6s ...when it gets to full throttle the motor starts vibrating alot ...and i have got similar results with all 3 motors ...its a really great product ...but can anyone tell me why it behaves like this ..
first off, i would like to say its great motor, ive ran on both 8s and 6s in my custom converted e-baja 5b. but there are a few problems.
cons:
- other motors out there that have higher power that cost less.
-quality of aluminum used is poor and fins on motor are negligible.
-motor needs active cooling to operate below 50degrees C.

pros:
-power is definable there, i peaked at 5120w on 8s.
-massive wires and plugs , great for power transfer and don't heat up at all.
-easy to disassemble and maintain.

if your looking to buy this motor, the 150A track-star ESC i used for 6s will do just fine without heat issues, but if u run with castles-XL 8s ,you will need more cooling for both motor and ESC.

hope this helps.
Video
  • Trackstar 1/5 Scale Senorless Motor

Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.