New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy TrackStar 13.5T Sensored Brushless Motor 2590KV

Turnigy TrackStar 13.5T Sensored Brushless Motor 2590KV

Discontinued Product

Please continue searching for a similar product.
SKU:
9052000021
WANT FREE SHIPPING? Click here to find out more!

The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality anodized CNC motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.

The TrackStar brushless motors make a great upgrade for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors.

Features:               
• Sensor-Based for Excellent Torque and Low-Speed Driveability 
• Adjustable Timing
• Compatible with any Sensored/Sensorless ESC
• CNC Machined Billet T6 Aluminum Motor Can  
• High Purity Copper Windings
• High Power Solder Tabs
• Removable/Replaceable Rotor       
• Powerful Sintered Neodymium Magnet    
• Precision Engineered for Maximum Energy Conversion


*Note: Sensor cable included

Specs:
Can Size: 540
Turns: 13.5
RPM/v: 2590kv
Poles: 2
Sensored: Yes (Standard 6 pin harness)
Max voltage: 11.1~14.8V (3~4S)
Max Current: 21A
Max Watts: 310w
Resistance: 0.0363ohm
No Load Current: 3A
Shaft Size: 3.175mm
Can Diameter: 36mm
Can Length: 51.5mm
Weight: 156g

  • SKU 9052000021
  • Brand TrackStar
  • Shipping Weight 233.0000
  • Packaging Length 138.00
  • Packaging Width 50.00
  • Packaging Height 105.00
  • Kv(rpm/v) 2590.00
  • Max Current (A) 21.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 15.00
  • Power (W) 310.00
  • Shaft A(mm) 3.18
  • Length B (mm) 52.00
  • Diameter C(mm) 36.00
  • Can Length D(mm) 38.00
  • Total Length E(mm) 67.00
  • Turnigy Trackstar Motor
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Einfach ein genialer Motor fr das Geld der von 2-4s gefahren werden kann
Sehr feinfhlig mit dem trakstar 120esc Turbo
Habe dieses Setup in einem 1/10 xray x10/2015 verbaut

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Einfach ein genialer Motor fr das Geld der von 2-4s gefahren werden kann
Sehr feinfhlig mit dem trakstar 120esc Turbo
Habe dieses Setup in einem 1/10 xray x10/2015 verbaut

Super Motor, luft sehr leise! Top

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super Motor, luft sehr leise! Top

This 13.5T is wound with 2 wires instead of 4 like the usual motors under ROAR rules. It lacks power through its rev range. I would recommend the other Trackstar motor as I have both and prefers it. Its also properly wound with 4 strands instead of 2.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This 13.5T is wound with 2 wires instead of 4 like the usual motors under ROAR rules. It lacks power through its rev range. I would recommend the other Trackstar motor as I have both and prefers it. Its also properly wound with 4 strands instead of 2.

really nice motor , very good torque and smooth,runs nice and cool , actual build quality is superb, no gaps around the wiring point or harness connector to allow dirt in, timing adjustment at the end bell is nice and easy with just two screws and easy to grip recesses with good clear timing markings , leave it set to 30 degrees if you are running with reverse enabled .
for the price this is a great motor , not the fastest 13.5 i have had but for street running or racing on a very tight track with a bit of timing advance on the esc its brilliant.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

really nice motor , very good torque and smooth,runs nice and cool , actual build quality is superb, no gaps around the wiring point or harness connector to allow dirt in, timing adjustment at the end bell is nice and easy with just two screws and easy to grip recesses with good clear timing markings , leave it set to 30 degrees if you are running with reverse enabled .
for the price this is a great motor , not the fastest 13.5 i have had but for street running or racing on a very tight track with a bit of timing advance on the esc its brilliant.

Ive just put the track star 13.5T motor in a mardave V12. I highly recommed this motor for racing its very smooth with the and has great pick up on the staights Im using a core 45 speed control with a program card the lipo im using are nano 5000 3.7V and zippy 6000 3.7V. I going to order a second one as there that good. Happy Racing!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ive just put the track star 13.5T motor in a mardave V12. I highly recommed this motor for racing its very smooth with the and has great pick up on the staights Im using a core 45 speed control with a program card the lipo im using are nano 5000 3.7V and zippy 6000 3.7V. I going to order a second one as there that good. Happy Racing!

An awesome motor! Extremely silent and smooth; even when used with a sensorless ESC, it gives an excellent performance...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

An awesome motor! Extremely silent and smooth; even when used with a sensorless ESC, it gives an excellent performance...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking