-
Product
Description -
Turnigy 555MG designed for F3A low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing ailerons.
Features.
• Metal gear
• Smooth cut curved gear.• Double M9.6 ball bearing (si-oil)
• 3 pole strong torque motor with low signal affect and CE certification.
• Rubber fitting case for waterproof
• Same with Futaba 25 tooth spline
• Heavy duty servo case
Specs:Weight: 19.5g
Dimensions: 30.00 x 10.00 x 34.00mm / 1.18" x 0.39" x 1.33"
Torque: 4.8V: 4.2kg/cm , 57 oz/in
Torque: 6.0V: 4.7kg/cm , 181 oz/in
Speed: 4.8V: 0.15 sec / 60° at no load
Speed: 6.0V: 0.13 sec / 60° at no loadSpline Count: 25
Gear Material: Metal
Type: Digital
Motor: Brushed -
Product
Specifications -
Additional Information
-
SKU:
BMS-555MG
-
Brand:
Turnigy
-
Shipping Weight(g)
65.00
-
Length
120.00
-
Width:
24.00
-
Height:
76.00
-
Unit Weight (g)
19.5
-
Torque(kg)(min. 0.01kg)
4.20
-
Speed (Sec/60deg):
0.15
-
A(mm):
37.00
-
B(mm)
31.00
-
C(mm)
32.00
-
D(mm):
10.00
-
E(mm):
43.00
-
F(mm)
21.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
Don't buy these till you check-out the BMS-555MG discussions and reviews on the HK International warehouse page. I experienced exactly the same jitters demonstrated in the video. They were installed as flap servos in an F3J glider and have been replaced with KST DS225 HV's. Actually flew the model with the jittering servos just once to the dismay of all who saw it. The 555's are in the bin.I bought 4 of these, for my RCRCM Typhoon (sold here under the name Cyclone).
Every single one of them was faulty. All of them were jittering at all but one extreme position. BEWARE!!! Test them straight out of the box, before installing!
https://www.youtube.com/watch?v=3LXjd4EiIdMAppena comprato due di questi servi , molto deludente e molto scadente la qualita' dei servi , alimentati a 5v sono sempre alla ricerca dello zero senza mai fermarsi.
State lontani da questi servi........so good!!! good!!!!!
goooooood!!!
so good!!! good!!!!!
goooooood!!!
so good!!! good!!!!!
goooooood!!!empfehlenswertes Flchenservo!
Kraftvoll mit sehr geringen Spiel bei geringen Gewicht von unter 20g.Nice servo, works well with my 7Ch orange FAST receiver, centers well, Futaba arms fit very well. Have two installed on the ailerons of my 2.65m K7A on LiFe. Can't beat the price.Gutes Servo. Preis ok.I bought 4 of these servos and 2 do not work at all. I therefore do not trust these sevos at all and will not use them. Not a good product !una buena opcion para sustituir los servos de ala carostrs bon servo pour les ailes...bonne qualit, solide et rapide
very good servo for the wings ... good, strong and fast -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesActual Dimensions download now [150kb] Actual Dimensions download now [150kb]
- acc
