New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy™ MG90S DS/MG Servo 10T 1.8kg / 0.10sec / 18g

Turnigy™ MG90S DS/MG Servo 10T 1.8kg / 0.10sec / 18g

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$5.46
Status:
In Stock
SKU:
MG90S
WANT FREE SHIPPING? Click here to find out more!
The Turnigy MG90S now features digital processing for greater precision. Same great performance, now with digital precision.
 
All Turnigy MG90S servos shipped as of July 1, 2014 now feature a digital processor.

Specs:
Weight: 18g
Dimension: 22.8*12.2*28.5mm
Stall torque: 1.8kg/cm (4.8V) - 2.2kg/cm (6.0V)
Operating speed: 0.10sec/60degree(4.8v) - 0.08sec/60degree(6.0V)
Operating voltage: 4.8-6.0V
Gear Material: Metal
Gear Type: Digital
Motor: Brushless
Temperature range: 0- 55deg
Servo Plug: JR (Fits JR and Futaba)
Spline Count: 10



  • SKU MG90S
  • Brand Turnigy
  • Shipping Weight 30.0000
  • Packaging Length 120.00
  • Packaging Width 10.00
  • Packaging Height 80.00
  • Torque(kg)(min. 0.01kg) 1.80
  • Speed (Sec/60deg) 0.10
  • A(mm) 33.00
  • B(mm) 23.00
  • C(mm) 29.00
  • D(mm) 12.00
  • E(mm) 32.00
  • F(mm) 16.00
  • Turnigy™ MG90S DS/MG Servo 1.8kg / 0.10sec / 13.4g
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

montato su vari aeromodelli, risponde molto bene ai comandi

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

montato su vari aeromodelli, risponde molto bene ai comandi

Twitchy and not very linear. For most planes they are fine but if you want fine tight movement you will just have to spend more. That's the thing, they are good for the $ you spend.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Twitchy and not very linear. For most planes they are fine but if you want fine tight movement you will just have to spend more. That's the thing, they are good for the $ you spend.

servo molto valid, buon rapporto qualità prezzo

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

servo molto valid, buon rapporto qualità prezzo

I have 8 of these running in various parkflyers, all foamy's. Iv'e had great luck except 2 which are pretty jittery. Other than that they all center pretty well and move evenly and reliably.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

I have 8 of these running in various parkflyers, all foamy's. Iv'e had great luck except 2 which are pretty jittery. Other than that they all center pretty well and move evenly and reliably.

I used these in foam airplanes siliconed in place and they work great. No issues....

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

I used these in foam airplanes siliconed in place and they work great. No issues....

I have used these servos for they price and metal gears.
They never lasted long. Usually the engine brushes bend and created short circuit upon which the servo electronics burned down in a very bad way that the short circuit was created for the rest of the RC plane electronics. Result - Plane destroyed if this happened in the air. Lately they are using a different elektronic set (PCB used to be green but the bad one is - red) which does not center the servo well. The servo hunts for the central position all the time. I am done with this one until at least they start installing decent electronics in it
Pic:
https://drive.google.com/file/d/0Bw3cHAyxN4dBemE1ai1XVm1ZRXc/view
Pic:
https://drive.google.com/file/d/0Bw3cHAyxN4dBZkNVcFhrS0NDaEk/view
Pic:
https://drive.google.com/file/d/0Bw3cHAyxN4dBMVdDcDlEM2E3NVk/view

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used these servos for they price and metal gears.
They never lasted long. Usually the engine brushes bend and created short circuit upon which the servo electronics burned down in a very bad way that the short circuit was created for the rest of the RC plane electronics. Result - Plane destroyed if this happened in the air. Lately they are using a different elektronic set (PCB used to be green but the bad one is - red) which does not center the servo well. The servo hunts for the central position all the time. I am done with this one until at least they start installing decent electronics in it
Pic:
https://drive.google.com/file/d/0Bw3cHAyxN4dBemE1ai1XVm1ZRXc/view
Pic:
https://drive.google.com/file/d/0Bw3cHAyxN4dBZkNVcFhrS0NDaEk/view
Pic:
https://drive.google.com/file/d/0Bw3cHAyxN4dBMVdDcDlEM2E3NVk/view

Good and powerful servo for a reasonable price. I use them in my Dragonfly 1800 without any issue. Be aware that these are metal geared and therefore quite noisy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good and powerful servo for a reasonable price. I use them in my Dragonfly 1800 without any issue. Be aware that these are metal geared and therefore quite noisy.

Excelentes Servos metalicos para ser usados en los ciclicos de los helicopteros 450

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelentes Servos metalicos para ser usados en los ciclicos de los helicopteros 450

I purchased four (4) of these servos. I installed all three in a HK250GT heli. The mounting ears broke have broken off three before I even got off the ground. They seem to be okay other than the weak mounting ears. Do yourself a favor and pass on these and try a better quality servo like maybe the corona?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased four (4) of these servos. I installed all three in a HK250GT heli. The mounting ears broke have broken off three before I even got off the ground. They seem to be okay other than the weak mounting ears. Do yourself a favor and pass on these and try a better quality servo like maybe the corona?

I really dont know if these are any good or not. I know the price seemed like a very good deal. until I started installing them in a 250 sized heli. never got the build finished because the mounting ears broke on three of the servo. didnt even try the fourth one. I am going on 59 years old and have been in this hobby since i was about 13. I have broke the ear off a servo until tonight. I wont be buying any more for sure.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I really dont know if these are any good or not. I know the price seemed like a very good deal. until I started installing them in a 250 sized heli. never got the build finished because the mounting ears broke on three of the servo. didnt even try the fourth one. I am going on 59 years old and have been in this hobby since i was about 13. I have broke the ear off a servo until tonight. I wont be buying any more for sure.

Customer files
Center hole :) Download [232]
Mounting Holes Download [42]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save