The Turnigy MX series of servos are reknown for their quality and reliability. Each servo is supplied with mounting screws and a variety of servo arms.
Servo Plug: JR type
Servo Lead Length: 180mm
Unit Weight (g):
Actually weighs 5.1 grams.. not 4.1 Smooth and accurate.
Servo S0361 at 3$ seems it's equal at the outset Time will tell.great servos very precise strong without any play using from a 3 months and still perform as like new but keep one thing in mind dnt use more then 5.3 volts other wise it will burn rightaway!!!Good and light servo!Nice little servo, Haven't had any issues with them so far.Good servo, work fine.
I have used them on my EPO planes, suggested for small medium model.
Good precision.The problem with this servo is the plastic gear. I have replace 3 of my mini DLG seevo just because of the broken gear. Another thing is the cable is so fragile so extra care must be taken to handling the cable. I have replace the cable with my broken 9 gram servo.This is perfect part for 3D indoor flight.I use these servos on a Inverza 280, replacing the eflite provided with the plane. They are a little heavier, but the gears seem stronger. The mechanical tolerance seems tighter. Good centering and good speed. To advice.Gewicht 4,77g inkl. Kabel ohne Servoarm
Einbauoeffnung 19,7 x 8,5mm
For now the best servo I had in this size. Forget about Dymond D47 and all the others. This is much faster, more precise, no sloppy gear train. Mechanically almost no play. I use it on a DLG Super Mini Topsky with 60 angle on the ailerons. Up/down difference is here less than 0.5 mm. Fairish working from 3.1 V. Correctly working from 3.3 V. Until now I cannot tell anything about durability.