These Turnigy high voltage digital servos are the ultimate in precision and holding power. Turnigy knows the importance of a good, reliable and robust servo and these are up there amongst the best. The TGY-1509MG features a full alloy case, coreless motor, dual ball bearing output shafts and a metal gear train.
To provide the best, most efficient performance these servos are designed to run on a variety of voltages from 6V up to 7.4V. In testing they have been able to withstand a lot of abuse and the TGY-1509MG low profile servo is perfect for the steering on RC cars or even the extreme demands of the 3D aircraft pilot.
The TGY-1509MG is supplied with a variety of output arms and a complete mounting hardware pack.
• Full metal case
• Excellent torque and speed
• Coreless motor
• Metal geared
• Twin ball bearings
• Perfect for RC cars and other high demand uses
• Low profile
• Complete mounting hardware pack
Operating Voltage: 6~7.4v
Working Frequency: 1520/333Hz 900us-2100us
Ball Bearing: 2BB
Servo Plug: JR type
Sevo Lead Length: 210mm
Spline Count: 25
Unit Weight (g):
I have used this servo for about 6 months in a 4wd buggy then it failed. It will still turn with no load on it but as soon as it is loaded, ie going into a corner, it has no power to keep the wheels turned.I thought it was a good servo until it failed, better off spending a bit more on a good brand that will last for years. Disappointing.0,07s- is very optimistic ... In general, the servo is made with high quality. But! when you turn the shaft past few degrees is noticeably slower. Visually perceptible.