Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

Turnigy™ TGY-313C Helicopter Cyclic DS/MG w/Alloy Case Servo 25T 3.5kg / 0.08sec / 20g

Turnigy™ TGY-313C Helicopter Cyclic DS/MG w/Alloy Case Servo 25T 3.5kg / 0.08...

QTY:

Now save save $0.00 $0.00

$25.15
Rating:
Stock:
Weight:
32 g
SKU:
9355000075-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

These Turnigy digital servos are the ultimate in precision and holding power. Turnigy knows the importance of a good, reliable and robust servo and these are up there amongst the best. The TGY-313C features a full alloy case, dual ball bearing output shafts and a metal gear train.

To provide the best, most efficient performance these servos are designed to run on a variety of voltages from 4.8V up to 6V. In testing they have been able to withstand a lot of abuse and the TGY-313C has been designed for the cyclic controls on a 450 size heli but is equally at home meeting the demands of the 3D aircraft pilot.

The TGY-313C is supplied with a variety of output arms and a set of mounting screws.

Features:
• Full metal case
• Excellent torque and speed
• Coreless motor
• Metal geared
• Twin ball bearings
• Perfect for 450 size helicopters
• Servo arms and mounting screws

Specs:
Model: TGY-313C
Operating Voltage: 4.8V~6v
Torque: 2.8kg@4.8v~3.5kg@6v
Speed: 0.09sec@4.8v~0.08sec@6v
Dimensions: 23x12x27.5mm
Weight: 20g
Working Frequency: 1520us/333Hz 900us-2100us
Motor: Coreless
Ball Bearing: 2BB
Gears: Metal
Servo Plug: JR type
Sevo Lead Length: 220mm
Teeth Count: 25

Product
Specifications

Additional Information

  • SKU:
    9355000075-0
  • Brand:
    Turnigy
  • Weight(g)
    32.00
  • Length
    50.00
  • Width:
    30.00
  • Height:
    45.00
  • Speed (Sec/60deg)
    0.08
  • Torque(kg)(min. 0.01kg)
    3.50
  • Unit Weight (g):
    20
  • A(mm):
    31.00
  • B(mm)
    23.00
  • C(mm)
    27.00
  • D(mm):
    12.00
  • E(mm):
    32.00
  • F(mm)
    20.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I put on a Trex 450 pro, they go perfectly with the middle slot, that was my question ... so far not work very well and heated, at first one of them to a different noise, but with the use equalized. have very good finish and quality ... we'll see over time



los puse en un trex 450 pro, van perfectamente con la ranura del medio, esa era mi duda... hasta el momento funcionan muy bien y no calientan, al principio uno de ellos hacia un ruido diferente, pero con el uso se igualaron. tienen muy buena terminacion y calidad... veremos con el tiempo

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After running these servos on 450pro for few months, it does better than the 306. It improve both the torque and resolution as gear ratio increased in it. However still unable to find replacement gear, as it won't survive hard direct crash. The output shaft is really no slop comparing to 306. Had swap out all 306 to replace with these servos, the 306 will be using for airplane only.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good performance for this price range, improvement in cyclic control with the increase torque. Same as TGY-306g but using different gear ratio, very tight tolerance with no slop in output gear. To be safe need to open the bottom casing to check and hot glue the wiring inside.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe mir eines zum testen gekauft. Das beste Servo das ich in der letzten Zeit von HK gekauft habe. Werde mir noch mehr bestellen, und hoffe dass die dann genau so gut sind.
Das TGY-313C ist ein spitzen Servo. Fast kein Spiel, stark und schnell.
Sehr gute Verarbeitungsqualitt. Hat eine gute Rckstellgenauigkeit, wenn das Ruderhorn auf 10cm verlngert ist betrgt die Ungenauigkeit ca 1mm.
Das Gewicht betrgt ohne Ruderhorn 19,8gr.
Das Kabel ist 21cm lang.
Bei meiner Futaba Steuerung stellt es bei iedem Trimm-klik sauber und sehr gleichmssig an, das sieht man nur wenn man das Ruderhorn massiv verlngert.
Fast das selbe Servo wie das TGY-306G. Etwas strker dafr aber etwas langsamer.
Eines der besten Servos fr diesen Preis, die es giebt.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.