New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Wing Wing Z-84 2900KV Brushless Motor w/Prop Adapter

Wing Wing Z-84 2900KV Brushless Motor w/Prop Adapter

Now save save $0.00 $0.00

$12.70
Status:
Out of stock!
SKU:
374000005
WANT FREE SHIPPING? Click here to find out more!

Replacment brushless motor w/prop adapter for the Wing Wing Z-84 airplane.

Note: Does not include replacement "O" rings.



Specs:
RPM/Volt: 2900KV
Voltage: 7.4V
Weight: 23g

  • SKU 374000005
  • Brand -
  • Shipping Weight 30.0000
  • Packaging Length 80.00
  • Packaging Width 25.00
  • Packaging Height 35.00
  • Kv(rpm/v) 2900.00
  • Max Current (A) 0.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 8.00
  • Power (W) 0.00
  • Shaft A(mm) 2.00
  • Length B (mm) 9.00
  • Diameter C(mm) 22.00
  • Can Length D(mm) 22.00
  • Total Length E(mm) 22.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This outrunner motor matching ESC came with my Wing Wing Z-84 PNF. It has plenty of power and speed for any maneuver. I utilize a LiPo 1500mah 2cell battery. The motor tends to screech out during throttle ups. This normally happens during launch at full battery charge. The set screws came out during a flight. I would highly recommend blue LockTight on the four mount threads and the two set screws on the shaft. The propeller shaft has a lot of slop. I took the motor off and placed a small washer spacer on the back end. That took care of that problem. This motor is a good value but is a low quality motor. I would prefer a motor upgrade on my Z-84 wing plane.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

This outrunner motor matching ESC came with my Wing Wing Z-84 PNF. It has plenty of power and speed for any maneuver. I utilize a LiPo 1500mah 2cell battery. The motor tends to screech out during throttle ups. This normally happens during launch at full battery charge. The set screws came out during a flight. I would highly recommend blue LockTight on the four mount threads and the two set screws on the shaft. The propeller shaft has a lot of slop. I took the motor off and placed a small washer spacer on the back end. That took care of that problem. This motor is a good value but is a low quality motor. I would prefer a motor upgrade on my Z-84 wing plane.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!