New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Wing Wing Z-84 EPO 845mm (KIT)

Wing Wing Z-84 EPO 845mm (KIT)

Shipped From:
  • USA
  • Global

Now save save $0.00 $0.00

$33.86
Alert me
Status:
Out of stock!
SKU:
374000001
WANT FREE SHIPPING? Click here to find out more!

The Wing Wing Z-84 is big fun in a small package! With its low price and ultra-tough EPO foam construction, the Wing Wing offers excellent value and fun at a price you can't beat!

Simplicity and practicality were kept in mind when designing this airframe. It offers an easily removable magnetic battery hatch, plug-in wing and tail design, carbon fiber wing spar and molded cooling holes for the battery compartment.

Most importantly, the Wing Wing flies as good as it looks. This model features a very wide flight envelope - it's equally happy zipping along at full throttle as it is gliding with the power off. It's also very aerobatic allowing for tight loops, fast rolls and just about any other wing aerobatics you choose to throw at it.

This version of the Wing Wing arrives in kit form, so you will need to add your own motor/ESC, servos, 4 channel transmitter/receiver and batteries. Simply glue on the wings & vertical stabs, install your electronics, setup your control rods and your ready to fly!

Features:
Ultra-tough EPO foam construction
Large cooling holes for the battery compartment
Aerobatic flight capability
Easy assembly

Specs:
Wingspan: 845mm
Length: 405mm
Flying Weight: 300g



Includes:
Wing Wing airframe kit
Hardware
Hook and Loop Strip (for battery mounting)
Instructions

Requires:
4 Channel TX/RX with elevon mixing
2900kv brushless motor
10~20A brushless ESC
2 x 9g servos
1300~1500mAh 2s Lipoly
Foam Glue

 

 

  • SKU 374000001
  • Brand Other
  • Shipping Weight 1234.0000
  • Length 540.00
  • Width 205.00
  • Height 260.00
  • IC/2:Elec -
  • Motorsize(diam-or-cc) -
  • Wingspan(mm) 845.00
  • Length(mm) -
  • SaleWeight(g) -
  • Capacity (mAh) -
  • FLY TYME - Wing Wing Goes To The Beach
  • Wing WIng FPV setup
  • FPV setup
  • Duo flight - Two WING WING chasing Flight
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

hi great little wing,my setup is 40amp ESC 2826-2200kv motor,on a 3s 1400
goes like Hell,Brilliant plane for the price,just waiting for the big one to come down in price..

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

hi great little wing,my setup is 40amp ESC 2826-2200kv motor,on a 3s 1400
goes like Hell,Brilliant plane for the price,just waiting for the big one to come down in price..

This is a very high quality foam wing with a superb finishing. The kit is super easy to build, however epoxy doesn't tend to stick on it, so my advice is to use EPO contact glue instead.
It handles crashes quite nicely. Although its only a 800mm wing platform, I've managed to load all my FPV gear on it, including an FC for inav and GPS.
However, I'm a bit surprised when seeing people writing here it flies great! I consider myself to be an experienced FPV/LOS flyer and every time I fly this model, I feel myself struggling both in LOS and FPV.
Firstly, CG is difficult to set. To fly considerably great it must be noise heavy. Secondly, it's a very lightweight model that does not handle wind very well. Due to this fact, its very difficult to fly in low throttle or to glide with it. It's almost impossible to keep it under control in extreme wind conditions.
In compassion with some of my other flying wings, this is the the less comfortable (and fun) to fly with.
That is why I rate overall with 4* out of 5*.
Setup:
servos tower pro MG 9g
FRsky radio system
omnibus f4 pro v2.1 w\ inav
m8n gps
emax rs2205
5050 propeller
30a dys esc
200mW video transmitter.
4s 1500mAh battery

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

This is a very high quality foam wing with a superb finishing. The kit is super easy to build, however epoxy doesn't tend to stick on it, so my advice is to use EPO contact glue instead.
It handles crashes quite nicely. Although its only a 800mm wing platform, I've managed to load all my FPV gear on it, including an FC for inav and GPS.
However, I'm a bit surprised when seeing people writing here it flies great! I consider myself to be an experienced FPV/LOS flyer and every time I fly this model, I feel myself struggling both in LOS and FPV.
Firstly, CG is difficult to set. To fly considerably great it must be noise heavy. Secondly, it's a very lightweight model that does not handle wind very well. Due to this fact, its very difficult to fly in low throttle or to glide with it. It's almost impossible to keep it under control in extreme wind conditions.
In compassion with some of my other flying wings, this is the the less comfortable (and fun) to fly with.
That is why I rate overall with 4* out of 5*.
Setup:
servos tower pro MG 9g
FRsky radio system
omnibus f4 pro v2.1 w\ inav
m8n gps
emax rs2205
5050 propeller
30a dys esc
200mW video transmitter.
4s 1500mAh battery

Good little flyer from what I see

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

Good little flyer from what I see

it is great little wing, but my new one is colored by some cheap color
https://www.dropbox.com/s/76l6dhesshe4b7p/2018-03-24%2000.55.23.jpg?dl=0

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

it is great little wing, but my new one is colored by some cheap color
https://www.dropbox.com/s/76l6dhesshe4b7p/2018-03-24%2000.55.23.jpg?dl=0

I bought this as my first airplane, i only fly fpv racing quadcopter so I can use this as a fpv plane. It is hard to master, I only used a couple of batteries flying in counter clockwise circle LOS, but it is fun. You need to stick with it, I crashed a LOT :D
Dont fly in windy conditions :) and mine came WITHOUT GLUE ( so only 4 crowns), so i used 6min epoxy, what a mistake becouse it doesnt stick good, than used hobyking superglue medium ca and it is ok.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this as my first airplane, i only fly fpv racing quadcopter so I can use this as a fpv plane. It is hard to master, I only used a couple of batteries flying in counter clockwise circle LOS, but it is fun. You need to stick with it, I crashed a LOT :D
Dont fly in windy conditions :) and mine came WITHOUT GLUE ( so only 4 crowns), so i used 6min epoxy, what a mistake becouse it doesnt stick good, than used hobyking superglue medium ca and it is ok.

received in good condition, don't have time to assemble yet

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

received in good condition, don't have time to assemble yet

tough plane, I crashed landing this multiple of times and its still in one piece. there is a problem in the motor mount when used with 3s 1300 and turnigy 2200kv motor, it shoots straight up as if its tail heavy, I managed to adjust the thrust angle couple of times but I'm still not getting it to fly straight when full throttle is applied. it flies great on mid throttle and hold itself in the air good even with high winds. I'll update again after managing to make this fly straight on full throttle. I'm trying mixing some elevator down when full throttle to compensate for the pitching of the nose. I suspect its more of a 2s setup with big prop but I'll keep trying till I get it right. I have another new kit that I'll paint and build after figuring out the right formula on this frame. not a bigger plane except if you have someone experienced to build it and test it for you first

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

tough plane, I crashed landing this multiple of times and its still in one piece. there is a problem in the motor mount when used with 3s 1300 and turnigy 2200kv motor, it shoots straight up as if its tail heavy, I managed to adjust the thrust angle couple of times but I'm still not getting it to fly straight when full throttle is applied. it flies great on mid throttle and hold itself in the air good even with high winds. I'll update again after managing to make this fly straight on full throttle. I'm trying mixing some elevator down when full throttle to compensate for the pitching of the nose. I suspect its more of a 2s setup with big prop but I'll keep trying till I get it right. I have another new kit that I'll paint and build after figuring out the right formula on this frame. not a bigger plane except if you have someone experienced to build it and test it for you first

5 stars on value & quality. I've used a 2200kv D2826 motor, 3S 2200mah battery & a 30A ESC on 6045prop. Motor & ESC are soldered direct to save weight. AUW=450g & could be lighter using a miniquad motor & a smaller battery. *Getting CG correct is essential on this wing*. For 35$ this is a great pocket-rocket ship that flies like a bigger aircraft than it really is on low-rates.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

5 stars on value & quality. I've used a 2200kv D2826 motor, 3S 2200mah battery & a 30A ESC on 6045prop. Motor & ESC are soldered direct to save weight. AUW=450g & could be lighter using a miniquad motor & a smaller battery. *Getting CG correct is essential on this wing*. For 35$ this is a great pocket-rocket ship that flies like a bigger aircraft than it really is on low-rates.

This is my second unit, first one lasted about a year and has been repaired and still flys- sort of....but they are such a great little wing I had to get another.

Easy to set up and launch and very capable of slow flight or simply amp it up, but i will reinforce the carbon rod connection section of the wings this time.

overall a great wing and worth the dollars.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my second unit, first one lasted about a year and has been repaired and still flys- sort of....but they are such a great little wing I had to get another.

Easy to set up and launch and very capable of slow flight or simply amp it up, but i will reinforce the carbon rod connection section of the wings this time.

overall a great wing and worth the dollars.

Great little wing!
My setup is Turnigy SK3 2822 1740kv motor, 1400mah 3S battery, 6x4.5 bullnose prop.
It flies really well, it's super fast on full throttle but can fly slow, too.
I've set dual rates to 60pcnt and expo to 50pcnt which makes it easy to control.
Had a few crashes - still in one piece. What may be worth doing is to put some tape or laminating film on the leading edge and the nose.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little wing!
My setup is Turnigy SK3 2822 1740kv motor, 1400mah 3S battery, 6x4.5 bullnose prop.
It flies really well, it's super fast on full throttle but can fly slow, too.
I've set dual rates to 60pcnt and expo to 50pcnt which makes it easy to control.
Had a few crashes - still in one piece. What may be worth doing is to put some tape or laminating film on the leading edge and the nose.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Customer files
WingWing Download [531]
my wing wing z-84 ready for flight Download [149]
No File Name Download [1819]
No File Name Download [1744]
No File Name Download [1909]
No File Name Download [1507]
No File Name Download [1617]
No File Name Download [1617]
No File Name Download [1274]
No File Name Download [1169]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save