New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

X-CAM A22-3H 3 Axis Gimbal System for Sony Nex5, Nex7 & BMPCC

X-CAM A22-3H 3 Axis Gimbal System for Sony Nex5, Nex7 & BMPCC

Now save save $0.00 $0.00

$488.64
Status:
Out of stock!
Weight:
3300 g
SKU:
431000023-0
WANT FREE SHIPPING? Click here to find out more!

The X-CAM A22-3H 3-Axis camera gimbal has been designed and engineered with the serious aerial photographer/videographer in mind.  Compatible with the Sony NEX5/7 A5000/6000 and BMPCC cameras this gimbal is packed with features including a full 360 degree panning ability. 

Although the X-Cam A22-2H comes with all adjustments preset as a "Ready to Run" gimbal the included USB cable allows you to connect your gimbal controller to your home computer and adjust settings such as the Tilt, Roll, and Pan Gain,  Linear and Tracking Mode tilt adjustments and Pan Control Options. Firmware updates can also be carried out using the USB interface cable. 

Features:
• Full Servo Control System
• Close-Cycle Controlling
• 5800Hz High Sampling Frequency
• Built-in HDMI to AV Module
• Built-in Infrared Localizer Built-in IMU Module"
• 360 degrees panning ability

Specs:
Weight: 1100g
DC: 11.1-22.2V(3S-6S Lipo)
Roll: +-45°
Pitch: +-90°
Yaw: 360° unlimited

Supported Cameras:
Sony Nex5
Sony Nex7
Sony A5000
Sony A6000
BlackMagic BMPCC

Supported Lenses:
Sony E16mm F2.8+VCL ECU1 0.75x Wide Angle Lens
Sony E 16mm Lens
Sony E PZ 16-50mm Lens

Includes:
X-CAM A22-3H Gimbal
X-Cam A22-3H Gimbal Controller
USB Cable
PPM Cable
Camera Mounting Screw
Rubber Damping Mounts
HDMI to AV Connector
Carry Case

 

  • SKU 431000023-0
  • Brand X-Cam
  • Capacity (mAh) -
  • Shipping Weight(g) 3300.00
  • Length 300.00
  • Width 285.00
  • Height 300.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Before purchasing I read the other review, and took a gamble. I've mounted on a DJI S800EVO with Sony NEX5 & 16mm f/2.8. The gimbal was balanced correctly as supplied, but with ND filter added I had to adjust the mounting position and move the camera back very slightly. I had two issues, 1) gimbal was missing two mounting screws 2) as supplied there were three wires hanging loose from the top of the mount, but logic suggested these were the positive/negative/signal wires for the camera IR trigger. I checked with X-Cam directly as HK most likely wouldn't know, added a JR connector and everything works as it should.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Before purchasing I read the other review, and took a gamble. I've mounted on a DJI S800EVO with Sony NEX5 & 16mm f/2.8. The gimbal was balanced correctly as supplied, but with ND filter added I had to adjust the mounting position and move the camera back very slightly. I had two issues, 1) gimbal was missing two mounting screws 2) as supplied there were three wires hanging loose from the top of the mount, but logic suggested these were the positive/negative/signal wires for the camera IR trigger. I checked with X-Cam directly as HK most likely wouldn't know, added a JR connector and everything works as it should.

Bad product, not ready to fly Hight vibration, no usb compatible with win8.1 (FTDI Prolific Fake...) signs of wear (used), No manual cable, connector, setup ecc.. the money in the trash

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bad product, not ready to fly Hight vibration, no usb compatible with win8.1 (FTDI Prolific Fake...) signs of wear (used), No manual cable, connector, setup ecc.. the money in the trash

Customer files
X-CAM A22-3H Download [638]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!