The time to upgrade is now.
The X8 2.4ghz module for Futaba allows your PPM compatible transmitter to enter the new era of radio transmitters.
Compatible with both the X8R and X8Rp receivers.
How does it work?
The X8 module communicates with an X8 receiver via the 2.4ghz spectrum, giving the user unprecedented performance and glitch free reliability never seen before in R/C FM/AM based systems.
Once powered up, the X8 seeks out a free channel before locking on and binding with the receiver. This binding process is made secure by each modules unique global ID and collision avoidance, giving you complete control and security.
Will it work with my transmitter?
The Futaba module has been fully tested on the following transmitters;
7U, 8U, 8J, 9Z, FN and all synthesized variations.
This also works with the Hitec Optic 6FM
Assan X8-F Futaba module.
-Highly secure and robust link
-No crystals or channels needed
-No interferance from motors, ignitions or metal to metal friction.
-Plugs straight into your existing radio
-No need to change any settings on your radio.
60x37x21mm / 2.36x1.46x.83inch
Im using 3 months an Assan X8F module on a MPX 3030 transmitter, connectet via L/S Port! It works perfect, Easy Glider, Omei, Sprinter, Simprop Selection, Fun Jet with 700 Watts and more models flying perfect! I use now 6 X8R7 Receivers, no glitches, no problem with binding, a perfekt solution!!!Zu Begin der Indoor-Flugzeit, habe ich meiner EVO9 das X8F gegnnt. Da ich nicht immer den Trainerport Stecker abziehen will, habe ich mir einen Umschalter gebastelt, um zwischen 35MHz und 2,4GHz zu whlen.
Ansonsten hab ich das Modul nach http://www.drivecalc.de/circuits/Assan_picsd.html angeschlossen. Das Binden geht super einfach, ich bin total berrascht.
Meine Empfehlung: Bedenkenlos kaufen!!Tom would you send me a e-mail I am in Indiana also and trying to get information for my 9C to change it to 2.4 thanks email@example.comIts unbelievable. I bought optic 6 before a few month on 35 Mhz. Im amateur and really beginner. :) Upgrade for an 2.4 GHz and was question of 1 minute. paring with receivers with studing of manual another 3 minutes and no more problems with crystals and other stupid double mixing problems. My glider flying 250 meter high and no problems with signal. I love HC because price for upgrade was terrible low. Thanks HCexcellent form fully advised, it works well interference zeroI have tested the X8F 2.4ghz Futaba module and the X8Rp2.4 ghz receiver on a Futaba FP-T8UP transmiter . The plane was a Sebart Katana 30E. It works fine. They are not problem with the trims and the range is sufficient for a multi -plane with this receiver without external antenna.
The transmiter module works also on my FC28 transmiter.
Thanks to Hobbycity for this good material.Super! I use Optic6. It works very good. The range ist enough.. about 300 m. One of teh best function is failsafe! I turn on my transmitter trottle 0 position. And After the landing I turn off my transmitter. No more risk with Prop.To be honest, I've had doubts whether this device will work with my MPX Royal EVO 12. But it did!
I started testing with a Gemini and I was surprised how well it worked. Next thing I tried a EasyGlider and let it go as far as I could see it - again no problem at all.
Surely this was not my last unit.Hello,
I tested ASSAN module in Hitec Optic 6 and result is outstanding.Binding is faster then other brands.
I do test range on ground and air with mini series receiver(6 and 7 chanel)and I have on ground 800 meters without range out.Amaizing!
Great job UH!So..ik have the X8F today and one houre later he doesn't work anymore.
No lamps on de X8F are working anymore, he don't give any signal.
the first 3 times he works well after the fourth time hey doesn't respong anymore on my FF9 CHP.
What can be the problem????
I remove and replace him several times but nothing happens, i make the contact in my tranmitter a little bit moving for better contacts with the X8F 2.4 Ghz.