XT150's are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!The male connector uses a collet style spliced contact area to provide more surface to surface contact than standard gold connectors which use a thin mushroomed sheet as a spring.
The connectors come in a pack of 5 (5 sets of 3, 15 in total) and can be linked together with the dovetail join on the outside of each Nylon housing.
Easy to solder and use, they are perfect for large batteries, esc or motors!Included:
15 pairs in sets of 3.
6mmIMPORTANT: "These are not cheap copied XT150 plugs. These original Nylon XT150 plugs, manufactured by AMASS, can handle over 150A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT150 plugs."
I had some trouble with my Blackjack 29 V2 on 6s.
The motor leads fell out of the original connectors because of extreme heat.
These 6mm connectors are superb, and you can slide them together as well.
Now I can run 2 sets of 2x3s with no problems, excellent product!
Very good quality xt 150 gold connectors.
You can use them to link together the speed controller and your motor using big sized cable for high amp combos.
For price this price I can only get 1 pair of exactly the same connectors in our local model or electric shop.
Perfect for motor connection on hi loads. Easy to solder and made of very good quality. Recommended product.Why has HK decreased the Contact Surface area on these and the AM-1005's??? These have 30pcnt less surface area and the AM-1005's have at least 50pcnt less surface area. This is just wrong and I will be buying connectors elsewhere as well as other stuff too. Quality went down and price has gone up just like at the local dollar store. What a bunch of C R A P O La !!!! You just lost a customer HK. What gives? Why cut your throat like this??I love this connector with three color nylon housing . I use it for my 2x 6s lipo pack in my T-Rex600EFL Pro.
You must have if You use high power applications up to 250A!Decided preobresti them again. Very high quality connectors. I advise everyone to buy them. Used to create electric bicycles. I do that in the store sale sets without the plastic shell. Since it is not always necessary in manufacturing. Using a load of up to 3.2 kW at them and up to 60 A phase current.Probably the best bullet connectors I have ever used!Plastic covers guarantee safe connections for any application and also help you keep your circuit cool :)The connectors fit together tightly enough that they don't come out and make good contact, but not so tightly that they are hard to get apart. These are long bullets, so even though they aren't as tight, they make as good or better contact than the short 6/8mm bullets!
The little slots in the sides for making connector strips are pretty useless, they come apart easily, but if you pretend they aren't there you still have a really good product.
Essentially 6mm bullets with protective sleeves on the male and female.
For the price they are pretty good value, you can put 6 on your ESC motor and then put 2 on the battery side of ESC then do 3 batteries, fitting out your whole car 3 batteries with one pack :)
EACH connector is rated to 250A (not a set of three), because on an ESC motor the power is only flowing between two wires at a time [eg 1 pair in and 1 pair out]so, there would be 250A going from the ESC, to the first connector, to the second, to the winding, to the third, to the first and back to the ESC, eg, the 250A passes through all connectors, none in parallel to share the 250A
How i solder these generally;
Tin the wire adequately.
Put connector in vice or "helping hands" with the hole for the wire at the top
Fill the rear of the connector about 30-50pcnt with solder (as there are no hole in the sides to feed in solder to front)
Slide sleeve over wire
Hold iron on thConectores de altisima calidad estos ofrecidos con su covertor los hemos usado para colocar motor a helicopteros de tamao 800 14S y excelentes.I have been an electrician for over 30 years, so I have done a few conections in my time these conectors are by far the best I have used so far in the hobby seen and looking at some of the reviews and comments posted people tend to forget that current carrying cappacity is all to do with size and contact area of which the XT 150 has, on ya Hobby King keep up the good work.