Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Zero Brushless (PNF)

Zero Brushless (PNF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
1896 g
SKU:
Z502-PNP
Product
Description
The Zero was a shock to Allied fighter pilots when first encountered in the early days of the Pacific war, dominating the skys with it's speed, lightweight design and heavy armament. The Zero proved lethal in a dogfight until it was eventually overcome by superior new fighters and a change of tactics used by allied fighter pilots.

This great looking Parkfly model captures the spirit of the zero with it's scale outline and pre-applied matt paint. A powerful pre-fitted brushless motor offers fighter like flight performance and the pre-fitted servo's handle the Zero like tight turns. You have the option of fixed under-carriage or hand launch, and being a Plug N Fly, around an hour or so is all you need before you are patroling the skys looking for that next dogfight.
 
Spec.
Wingspan: 850mm
Wing area: 13.6dm2
Length: 705mm
Flying Weight: 340g~375g
Motor: 1300kv brushless outrunner
ESC: 20A
Servos: 3x9g
 
Includes:
All Hardware
Glue
Tools
2 x Propeller
Decal Sheet
 
Required:
Your Own 4 Channel TX & RX
7.4V 1000mah 2s ~ 1300mAh 2s Lipoly
Product
Specifications

Additional Information

  • SKU:
    Z502-PNP
  • Brand:
    N/A
  • Weight(g)
    1896.00
  • Length
    1000.00
  • Width:
    175.00
  • Height:
    300.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Als erstes neuen Motor rein DT750 ca. 80g (passt an vorhandene Motorhalterung), mit dem original 50g gar nicht erst probiert. Trotzdem vorn viel zu leicht, schtze mu ca. 100g Motor rein bzw. Akku entsprechend vorschieben. Lackierung ist super, aber das Styro ist natrlich nicht so toll. Achtung lst sich mit dem HK Foam Glue super thin Kleber auf, also den beiliegenden EPS Kleber verwenden. Nur was fr GWS (Clone) Enthusiasten.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane with the motor it comes with and a 1000mah 3s battery stuffed all the way forward is very tail heavy. I had to add over 3 OZ (85gm) to the nose and it will fly but it's still tail heavy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muy contento con el envo, el paquete lleg bien y sin desperfectos a Espaa. El modelo, Zero Brushless, entero y sin desperfectos. La calidad-precio est bien, tiene pequeos fallos sin importancia pero de todos modos contento con el modelo. El nico "pero" es que el cono de la hlice lleg un poco deformado, pero se puede arreglar aplicando calor.
Estoy ansioso por volarlo.

Saludos!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi guys wrote about this plane before, she need a lump of led up front that means a great loss of power. to get it rite u got to spend a bag full of money to get it flying. yes as one flyer said everytime u land a bit drops of the foam is horrible. this thing is not quality at all nicer warbirds to buy very old rc bird tec. move on not nice guys . just a green bit of card board.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
came well boxed in excellent time but this one was bad from the start dont know what the foam is cheap and nasty plane cog out by a mile pulles radicaly to left or the right those days that l few were picture perfect no wind and the zero was a pig to fly hated it from the start first bad one from hk
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
arrived in good time well packed box guan lee model foam low quality not epo, but strong looks ok but have seen better put together in 4 hours nothing tricky here very dissapointed with this model. low powered needed lots of weight to get cog rite very twichey little plane its no zero crashed twice not a good one hk not recomended
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Disappointing. No CoG specified and even with adding nose weight, removing tail weight as much as possible it was still too temperamental to be an enjoyable flyer. No bracing in the control rods meant flexing was a problem, no threading on the elevator and rudder wires either which meant they had to be bent and cut to shape. Elevator uneven at rest and resulted in snap rolls when applied with force, resulted in a dive that had no chance of recovery. Lasted one flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Zero colour scheme download now [380kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.