New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

ZIPPY 400mAh 30C Single Cell

ZIPPY 400mAh 30C Single Cell

Discontinued Product

Please continue searching for a similar product.
SKU:
Z4001S-30C
WANT FREE SHIPPING? Click here to find out more!

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the market! No matter the application you have in mind, zippy lipoly batteries are an ideal choice.

Spec.
Capacity: 400mAh
Voltage: 1s / 3.7v
Discharge: 30C Constant / 40C Burst
Weight: 13.2g (including wire, plug & case)
Dimensions: 63x26x4mm
Discharge Plug: JST

  • SKU Z4001S-30C
  • Brand Zippy
  • Shipping Weight 16.0000
  • Length 70.00
  • Width 6.00
  • Height 26.00
  • Capacity (mAh) 400.00
  • Discharge(c) 30.00
  • Max Charge Rate(C) 2.00
  • Length-A(mm) 63.00
  • Height-B(mm) 26.00
  • Width-C(mm) 4.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use this on micro brushed quads and it works great for me, decent if not long flight and good power. That said the nanotech 350mah 65-130c is better for me in small brushed 1s quads,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this on micro brushed quads and it works great for me, decent if not long flight and good power. That said the nanotech 350mah 65-130c is better for me in small brushed 1s quads,

I bought 4 pcs and all 4 are coming with 3,73V until 3.75V loaded. After loading with different loader they take 28mA and 4.2V and 2. has 36mA take 4.2V and 3 has 41mA 4.2V and last one had 58mA and 4.2V all battery loaded with 100mA.

These lipos worked max 38sec. and they are empty. 2. Loading same.

I tell you the whole chatge is BAD !!! SHAME HK, cause no checking before!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 pcs and all 4 are coming with 3,73V until 3.75V loaded. After loading with different loader they take 28mA and 4.2V and 2. has 36mA take 4.2V and 3 has 41mA 4.2V and last one had 58mA and 4.2V all battery loaded with 100mA.

These lipos worked max 38sec. and they are empty. 2. Loading same.

I tell you the whole chatge is BAD !!! SHAME HK, cause no checking before!

Really thin. These fit in places where some other comparable capacity packs don't. They seem to live up to their rated capacity, and don't get too warm while in use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really thin. These fit in places where some other comparable capacity packs don't. They seem to live up to their rated capacity, and don't get too warm while in use.

I use this single for powering a mini TX on my quad works great nice and light and also use it for LED on a RC car, I'll be getting more :).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this single for powering a mini TX on my quad works great nice and light and also use it for LED on a RC car, I'll be getting more :).

No problems. The battery works good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No problems. The battery works good.

Good for walkera mini cp

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good for walkera mini cp

Good battery; although I just started using it. I acutally needed a 2S, but bought two of these because of their dimensions (longer battery means even weight distribution) and lighter weight. I cut off leads from an aging LiPo and soldered two of these together to make a 2S with balance charger plug. I'll be uploading the pics shortly, in case somebody is interested. I am using these in a scratch-built FP heli which is an offshoot of NineEagles Kestrel 500SX. Two of these combined weigh far less than the recommended one and give higher C.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good battery; although I just started using it. I acutally needed a 2S, but bought two of these because of their dimensions (longer battery means even weight distribution) and lighter weight. I cut off leads from an aging LiPo and soldered two of these together to make a 2S with balance charger plug. I'll be uploading the pics shortly, in case somebody is interested. I am using these in a scratch-built FP heli which is an offshoot of NineEagles Kestrel 500SX. Two of these combined weigh far less than the recommended one and give higher C.

ok very good !! works fine and it's very light !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ok very good !! works fine and it's very light !!!

Well made and a neat little battery not tested it yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well made and a neat little battery not tested it yet.

klein flach das beste fr wenig Platz .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

klein flach das beste fr wenig Platz .

  1. 1
  2. 2
  3. 3
Customer files
Two 1S batteries soldered together to ma Download [170]
Two 1S batteries soldered together to ma Download [167]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!