Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the market! No matter the application you have in mind, zippy lipoly batteries are an ideal choice.
Voltage: 4S1P / 4 Cell / 14.8v
Discharge: 30C Constant / 40C Burst
Weight: 845g (including wire, plug & case)
Balance Plug: JST-XH
Discharge plug: 5.5mm Bullet-connector (without housing)
Unit Weight (g)
Max Charge Rate(C):
These batteries don't quite put down the power they claim. But overall are great for the price. And have good run time.This product is the battery required for drones bandeutyi I use. Quality of the product is satisfactory, but it has insufficient charge capacity.The batteries arrived well packed after a week in transit. Individually boxed and in bubble wrap. They balanced well with first charge and every balance thereafter. Within 0.01V. They discharge evenly and deliver good endurance. After 15 cycles they start to show bulging.Having such an issue with the NFR on these. After ordering these and finding out they were the wrong size. My fault for not getting exact mesurments.
Been waiting since may 23 to get a refund. Have gotten 3 messages saying "have received your batteries and will evaluate them." Even the notes on the RMA say it was accepted and approved about a week ago.
Lesson learned always get the correct product the first time or you will have to run around for weeks to get a refund.Good battery for the money, using it on my 800mm hex with 390kv motors, AUW 3kgs and flight time a bit more than 20 mins. Really works well with this set up so I have two giving me plenty of flight time!5 packs gekauft. alle ok. ABER: die zellen sind miteinander verklebt!! schlecht, wenn mal eine zelle defekt ist. keine ahnung ob das bei den 8000mah turnigy nano tech anders ist. selbst wenn, die sind ein gutes stck teurer.
bought 5 packs. all cells are fine. BUT: all cells are glued together!! very bad, if one cell is broke. there is no chance to replace bad cells. i don't know if the 8000 mah turnigy nano tech are not glued together. whatever, they are much more expensive.
weiss jemand ob die 8000 mah turnigy nano tech auch zusammen geklebt sind?
anyone know if the 8000mah turnigy nano tech glued together?Great battery bought three im getting 20min per battery with a tarrot 680 pro and sunnysky 580kv with 12x3.8 props. also not bad on the weight.So far so good! This is loaded up in my Skyhunter FPV plane, powering a Cobra 3520 820kv motor, and turning a 12x6 prop. I can fly for just about an hour, depending on throttle usage. I really like the flatter, wider profile of this battery as it fits well in the fuselage.
Just as a suggestion, I'd really like to see the XT-90 connector being used on these bigger batteries. Other than that, no complaints!I bought 3 of these about a year ago. All three have been sitting on my shelf I haven't had a chance to use them. Except for changing the connectors on them. Before I even got a chance to even do that one of the packs cells started to puff up. After finally having a chance to plug it into my quad to calibrating motors and the like. It has now puffed up to uncomfortable size. I will not be going with this brand in the future.Otimo produto! Recomendo!!