Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

12V 3A UBEC - 2 ~ 5S Li-Po (6-23v)

12V 3A UBEC - 2 ~ 5S Li-Po (6-23v)

QTY:

Now save guardar 0,00 € 0,00 €

6,03 €
Stock:
Peso:
20 g
SKU:
074000238-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Las cosas buenas vienen realmente en pequeños paquetes y esto 12V 3A UBEC no es una excepción a esa regla. Con una alta eficiencia con modo de conmutación ayudando a proporcionar una mejor disipación del calor en comparación con los reguladores de tensión lineales y un diseño de PCB blindado y salida de la bobina EMF ayudando a proporcionar una salida de voltaje de ruido estable y baja, Tiene toda la funcionalidad de un UBEC de primera clase, pero romper la rutina banco. Este UBEC también cuenta con una función de protección de polaridad inversa para mayor tranquilidad. ¿Qué más se puede pedir en una salida de 12v UBEC.

Especificaciones:
Entrada: 6-23V (2-5S Lipo, 2-6S Li-Fe o 5-15S Nixx batería)
Salida: 12V / 3A (Menos de 50 mV pico a pico de tensión @ 2A)
Dimensiones: 57,0 x 14 x 25.0mm
Peso: 13 g

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    074000238-0
  • Brand:
    N/A
  • Peso ( g)
    20.00
  • Longitud
    70.00
  • Ancho:
    15.00
  • Altura:
    30.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
terrible would not even give a total 1 amp and varied the from .1 to .5 amps a ton don't get this get any but this its baaaad ...........

.
.
.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This regulator DOES NOT WORK for inputs less than about 14v, which means that it is completely useless for 3s lipo packs, and will even start dropping voltage when a 4s pack gets very low.
Hobbyking blatantly lied about the required input voltage.

When it has enough voltage, the regulator does seem to work properly, at least at relatively low loads.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is not a buck-boost regulator.

Very noisy in UHF band (300Mhz - 3Ghz) with spurious transients right around 433MHz. So do not use this if you plan on using a LRS.!! Go Linear :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
12V 3A UBEC - 2 ~ 5S LiPo (6-23v) electrically very good, I am very happy to use this ubec, distribution of electric current is very stable, thanks hobbyking
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
steady 12v good to make sure dont blow anything
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fine and pure current from this UBEC, thumbs up!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great UBES - no problems at all - does not get too warm - I have used for mobius gimbal and fpv cameras
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Worked fine for about 3 hours, then I plugged in the quad to go for a flight and it randomly started pouring smoke. Opened up the shrinkwrap and the whole thing was melted and burned... No idea what caused it, but it wasn't my installation. Guess just a faulty unit. It was only being pushed with 4S power, so it wasn't overpowered.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For 4S multicopter.. I use it for stable 12v... yes I am going to buy when I need more
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought one of these to power a 12v camera from a 3S (11.1v) or 4S (14.8v) LiPo (depending on which battery I was flying with) and it was faulty. No quibble about a replacement but the replacement was faulty too!

Supply it with 12v or less and you get less than 12v output so the claim that it works on a 2-5S Lipo is false.

It could just be a faulty batch - do you want to take that chance?

This time I'll ask for a refund.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [1241kb]

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.