New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

2.4Ghz A-FHSS Receptor compatible 8CH (Hitec compatible Mínimos)

2.4Ghz A-FHSS Receptor compatible 8CH (Hitec compatible Mínimos)

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

19,62 €
Estado:
En stock
Peso:
31 g
SKU:
236000011
WANT FREE SHIPPING? Click here to find out more!

Estos receptores son una gran opción para los usuarios de los sistemas de radio Hitec A-FHSS. Ellos ofrecen un excelente rendimiento y características adicionales. Este receptor es también HV (alta tensión) capaz que ofrece un rango de tensión de entrada de 3,5 ~ 16V.

Compatibilidad:
Compatible con la serie Hitec Mínimos transmisores 2.4Ghz A-FHSS

caracteristicas:
• Hitec Mínimos de 2,4 GHz FHSS A-compatible
• Soporta PPM y salida RSSI
• Largo Alcance> 1,5 kilometros

Especificaciones:

Número de canales: 8
Tensión de funcionamiento: 3.5V ~ 16V
Corriente de funcionamiento: 30 mA
Rango de funcionamiento: de gama completa (> 1.5km)
Dimensión: 44x24x14mm
Peso: 9,3 g

* Nota:
Esta unidad no está diseñada, fabricada o con el apoyo de Hitec, ni es una copia de un receptor de Hitec.

  • SKU (Número de Referencia) 236000011
  • Brand HobbyKing
  • Capacidad ( mAh ) -
  • Peso ( g) 31.00
  • Longitud 110.00
  • Ancho 16.00
  • Altura 75.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Put is simple... I have had good luck with these. There is an extra step to binding, so read the instructions.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put is simple... I have had good luck with these. There is an extra step to binding, so read the instructions.

These are great receivers to use with the Hitec system. I run them with my Aurora 9X and they are rock solid with more range than I have been able to test. As long as you don't need the telemetry functions and have the latest firmware on the radio, this is an unbeatable deal. They have been tested and used in glow planes and gas planes up to 30cc.










































verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are great receivers to use with the Hitec system. I run them with my Aurora 9X and they are rock solid with more range than I have been able to test. As long as you don't need the telemetry functions and have the latest firmware on the radio, this is an unbeatable deal. They have been tested and used in glow planes and gas planes up to 30cc.










































I have purchased and used a few of these now and not had any problems at all. Initially I used them on short range models only but after further testing was convinced about their 'full range' spec so I now tend to fitt them to models with limited internal space. Used in IC & slope soaring models more recently, again no problems. TX's - Eclipse 7 with 2.4 Spectra module, Futaba FF7 with Specttra module and Eclipse 7 Pro (comes with Spectra module).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have purchased and used a few of these now and not had any problems at all. Initially I used them on short range models only but after further testing was convinced about their 'full range' spec so I now tend to fitt them to models with limited internal space. Used in IC & slope soaring models more recently, again no problems. TX's - Eclipse 7 with 2.4 Spectra module, Futaba FF7 with Specttra module and Eclipse 7 Pro (comes with Spectra module).

i have an optic 6 transmitter but i cant bind with this receiver because the led on the transmitter is always red. i just did all the steps i saw here but it still red. How can i bind this receiver. thanqs

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have an optic 6 transmitter but i cant bind with this receiver because the led on the transmitter is always red. i just did all the steps i saw here but it still red. How can i bind this receiver. thanqs

I bought this receiver but i cant bind with my hitec optic 6. The led on the transmitter is always red. i need some help.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this receiver but i cant bind with my hitec optic 6. The led on the transmitter is always red. i need some help.

This is an awesome little receiver if you are looking to add ppm to your Hitec system. I recently started usng the Naze32 flight controller in my quads and was using pwm. This severly limits the functions the Naze32 is capable of so when I saw this I had to try it. It works great with my Aurora 9 transmitter and now I have ppm capabilities when I thought I would have to buy a new radio system! The one signal wire setup makes for a much more clean setup on my 250 size fpv quad and opens the other pins taken by pwm receivers for all the expansions the Naze32 has to offer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is an awesome little receiver if you are looking to add ppm to your Hitec system. I recently started usng the Naze32 flight controller in my quads and was using pwm. This severly limits the functions the Naze32 is capable of so when I saw this I had to try it. It works great with my Aurora 9 transmitter and now I have ppm capabilities when I thought I would have to buy a new radio system! The one signal wire setup makes for a much more clean setup on my 250 size fpv quad and opens the other pins taken by pwm receivers for all the expansions the Naze32 has to offer.

I own 3pcs - Habe 3 Stck - Works like the Original - Funzt wie die Orginalen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I own 3pcs - Habe 3 Stck - Works like the Original - Funzt wie die Orginalen.

I'm using one for some months and got only 300-400 meters range before failsafe takes control. O bought 3 units and all of them behave like this.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using one for some months and got only 300-400 meters range before failsafe takes control. O bought 3 units and all of them behave like this.

Great receiver for a great price! I binded with a aurora 9x with ease and didn't to update. I will be getting more of these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great receiver for a great price! I binded with a aurora 9x with ease and didn't to update. I will be getting more of these.

These are very good quality recievers, tested with the Aurora 9 and Optic 6 Sport. You may need to update the TX and module software to latest version to make your transmitter compatible with minima recievers. Great product, but as of today the newer Delta 8 is a better choice as it's also compatible with Futaba and FrSky.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are very good quality recievers, tested with the Aurora 9 and Optic 6 Sport. You may need to update the TX and module software to latest version to make your transmitter compatible with minima recievers. Great product, but as of today the newer Delta 8 is a better choice as it's also compatible with Futaba and FrSky.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
RSSI output-Minima Download [148]
Manual-Hitec compatible - ITA Download [14]
Manual - Hitec Compatible 8ch Full Range Download [293]
RSSI Oscilliscope Signal Output Download [9]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!