Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

Sistemas de 2,4 Ghz SuperMicro - Brushless ESC - 3.5A

Sistemas de 2,4 Ghz SuperMicro - Brushless ESC - 3.5A

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
8 g
SKU:
HK030
Descripción
del

Tan pequeño como vienen! la 2.4ghz SuperMicro Sistemas 3.5A esc pesa en una 0.3grams asombrosas!

Especificaciones:
Amps max: 3.5A (4A Burst)
Voltaje: 3.0V ~ 4.2V
Peso: 0,3 g
Tamaño: 12.60mm x 13.25mm x 3.2mm

incluye:
1 x HK030 sin escobillas CES

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    HK030
  • Brand:
    N/A
  • Peso ( g)
    8.00
  • Longitud
    0.00
  • Ancho:
    0.00
  • Altura:
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
mine worked for a day...then it fried, i it becomes way too hot at normal voltage, i checked wiring and voltage and they are all normal... so what did i do wrong? anybody have same experiences? or like the TGY DP 3A esc, they changed the components to newer components making it fry over 3.7v
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Funktioniert einwandfrei in meinen nano cpx geflasht mit BLHeli
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great ESC. im using it with 1S Lipo and the " hexTronik 2 gram Brushless Outrunner 7700kv" with GWS3020 for a multi-copter. The ESC is easy to use and fast responding.
The negative sides:
It sometimes has problems to startup the motor.
Further: Mention that it has (besides the power-electronik and the controller) no circiut components like other ESCs have. Obviously there are reasons, why others need some stabilization and filter circuits. In my case it was necessary to buffer the power supply with an capacitor to get stable operation.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Extremely lightweight and it works right after soldering wires. I had some troubles starting two tested motors (T2211-2300 worse, and TR2204-14T almost ok). After start, run smoothly.
I know that motors were bigger than appropriate and lower KV, but by my guess it should be easier to handle for ESC?
Perhaps lower resistance of pack and wires, and/or a capacitor at input, would improve startup? I have used only 100mAh 1s (20C).
Anyway, it seems ok and I am looking forward the use with much smaller motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good, very cheap. Works well when flashed (BL Heli) for mCP x tail (does NOT work without flashing!!!)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Uplne miniaturni regulator, pozor nema BEC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ridiculously small, probably great, but i'll go cross-eyed soldering it ! will report back after use
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have been using one of these for about a month on a rewound T1400-4500 brushless motor. Worked well except sometimes the motor would not start. I thought it was a motor problem but yesterday I replaced it with a TYG DP 3A. The motor works perfectly with the DP 3A. I tired a new T1400-4500 and a HK1608 5900 with this ESC and saw a few starting problems. Both run perfectly on the DP 3A ESC. I prefer DP 3A.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
used this with a HK 2 gram motor. got 18.3 grams of thrust as a tractor using GWS 2508.
great ESC, will be getting more.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great with a Spektrum 6400 and 2g outrunner on 1s. Easy to solder wires on with a nice small tip iron.
Check the manual in the files tab for how to set the throttle range, by default mine wouldn't completely stop until the range was reset.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.