Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

3W LED blanco de la aleación de Gaza de 120 mm x 12 mm (3s Compatible)

Generating Links

3W LED blanco de la aleación de Gaza de 120 mm x 12 mm (3s Compatible)

Precio:

Now save ahorra 0,00 € 0,00 €

5,92 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
371000070
¿Envío gratis? ¡Haga clic aquí! aprender más!

3W LED blanco de la aleación de Gaza de 120 mm x 12 mm (3s Compatible)

Especificaciones:
Dimensiones: 120 x 12 mm
Peso: 7 g
Conector: JST
ángulo de haz: 120 grados        
Potencia: 3W
temperatura de color: 6000-6500 200K ±
Voltaje: 11.1v-13,5V (3S) LIPOLY
Corriente: 280mA
Flujo luminoso: 240-270LM
Índice de reproducción cromática: 70-85
Material: placa de aluminio
Vida útil: 50.000 horas
Temperatura de funcionamiento: -20 - +60 grados centígrados

* Nota: Por favor asegúrese de que el consumo de corriente es inferior a 280mA que puede dañar la tira de LED
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

DJhartson | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 19, 2016

bright as frig and cheap as yogurt. also waterproof! mine bent a little, but it's still shining. submerged several times and numerous impacts. i use it as a frontlight in my rc car.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 05, 2015

Very very bright even under high sun

Ace Daniel | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 26, 2014

with 2s it is super bright, on 3s is it to much for my eyes and to hot for my model and on 3s it needs 7W! I think to much for a long live. Realy cool stuff. I love them and have 14 of them. On 3s I have 2 diodes bevor them, than is the temperature ok and my eyes going not blind.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 17, 2014

Very successful to understand orientation of multi copter

watson220 | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 26, 2014

Nhradn hriadel na motor NTM 3548-900ot/V.

DoucheHunter | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 05, 2014

I like these.. run at 9 volts DC.. or they will get much too hot. Need cooling at 11 volts. Pay attention to polarity. Some of the JST's are improperly wired

AUTO XX | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 25, 2013

0.8A draw, 9.8W consumption on 3s. As others have stated, the JST connector is backward. The LED is labelled correctly, they just got a bad bin of connectors. Very bright! I got it for a 3D printer but it looks to be too much so I'll likely use one on the lower leading edge of each wing as landing lights for dark FPV flights. It will ABSOLUTELY NEED HEATSINKING or adequate air flow to keep it from overheating on 3s!

wesix | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 05, 2013

very bright at 12v, it will almost blind you! it gets too hot to touch in just a few seconds
tested at 7.6v (2s lipo) lights up decently and mildly bright, not hot. so i think about 9v should give it a good brightness without too much heat

fern420 | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 18, 2013

ridiculously bright!!! by far the brightest of any LED i have ever purchased from hobby king.......seriously blinding........as well as get very very very hot.

Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!