Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

3W LED blanco de la aleación de Gaza de 120 mm x 12 mm (3s Compatible)

3W LED blanco de la aleación de Gaza de 120 mm x 12 mm (3s Compatible)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
10 g
SKU:
371000070
Descripción
del

3W LED blanco de la aleación de Gaza de 120 mm x 12 mm (3s Compatible)

Especificaciones:
Dimensiones: 120 x 12 mm
Peso: 7 g
Conector: JST
ángulo de haz: 120 grados        
Potencia: 3W
temperatura de color: 6000-6500 200K ±
Voltaje: 11.1v-13,5V (3S) LIPOLY
Corriente: 280mA
Flujo luminoso: 240-270LM
Índice de reproducción cromática: 70-85
Material: placa de aluminio
Vida útil: 50.000 horas
Temperatura de funcionamiento: -20 - +60 grados centígrados

* Nota: Por favor asegúrese de que el consumo de corriente es inferior a 280mA que puede dañar la tira de LED
Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    371000070
  • Brand:
    No
  • Peso ( g)
    10.00
  • Longitud
    125.00
  • Ancho:
    5.00
  • Altura:
    20.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
bright as frig and cheap as yogurt. also waterproof! mine bent a little, but it's still shining. submerged several times and numerous impacts. i use it as a frontlight in my rc car.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very very bright even under high sun
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
with 2s it is super bright, on 3s is it to much for my eyes and to hot for my model and on 3s it needs 7W! I think to much for a long live. Realy cool stuff. I love them and have 14 of them. On 3s I have 2 diodes bevor them, than is the temperature ok and my eyes going not blind.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very successful to understand orientation of multi copter
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nhradn hriadel na motor NTM 3548-900ot/V.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I like these.. run at 9 volts DC.. or they will get much too hot. Need cooling at 11 volts. Pay attention to polarity. Some of the JST's are improperly wired
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
0.8A draw, 9.8W consumption on 3s. As others have stated, the JST connector is backward. The LED is labelled correctly, they just got a bad bin of connectors. Very bright! I got it for a 3D printer but it looks to be too much so I'll likely use one on the lower leading edge of each wing as landing lights for dark FPV flights. It will ABSOLUTELY NEED HEATSINKING or adequate air flow to keep it from overheating on 3s!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very bright at 12v, it will almost blind you! it gets too hot to touch in just a few seconds
tested at 7.6v (2s lipo) lights up decently and mildly bright, not hot. so i think about 9v should give it a good brightness without too much heat
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ridiculously bright!!! by far the brightest of any LED i have ever purchased from hobby king.......seriously blinding........as well as get very very very hot.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.