-
Descripción
del -
0.90 Tamaño láminas de fibra de vidrio reforzada con la raíz y la punta equilibrada.
Especificaciones:
Longitud: 700 mm
Peso: 163 g cada unaGrip: 12mm -
Product
Specifications -
Información adicional
-
SKU (Número de Referencia):
GF700
-
Brand:
N/A
-
Capacidad ( mAh )
No
-
Peso ( g)
337.00
-
Longitud:
73.00
-
Ancho:
26.00
-
Altura
62.00
-
SKU (Número de Referencia):
-
Community
Discussions -
-
Rate&
Review -
necessitano di un bilanciamento ma nulla di ec cezionaleQuite good blades! Very much will approach for beginners. Rigidity comprehensible even for good 3D pilotageUsed this blades on my t-rex 700. Great for autorotation, but not for hard 3D. After 20 3d flyind, found some warnings on the surface on the blades and stoped using it.VERY BACK CONSTRUCTION
I ORDERED THESE BLADES TO USE ON MY TREX 700 FOR SETTING IT UP
I DID A SIMPLY STRESS TEST ON THEM AND ONE BLADE FAILED AT JUST 4 KG SO CARRIED ON WITH THE OTHER AND IT FAILED AT 6KG
ON CLOSER INSPECTION THE BLADES WHERE NOT OF THE SAME CENTRE MATERIAL ONE WAS HIGH DENSITY BLUE FOAM AND ONE WAS CHEAP WHITE
THE BLADE THAT FAILED HAD NO RESIN ON THE GLASS CLOTH SO IT FAILED AT THAT POINT
ON THE SURFACE THE BLADES HAVE A GOOD FINNISH BUT IT IS ALL ABOUT WHAT IS IN THE MIDDLE
!!!...WARNING...!!!
Very weak blades @1850rpm head speed these blades broke off right next to the blade root on first roll. Needless to say the heli landed very hard 3 or 4 seconds before the blades did.
If you are on a budget and have to use these blades.
Keep your head speed below 1700rpm and just hover very gently.
I would keep my distance too!!!!Outstanding blades! Just received today and flown superb! 2/10 of a gram blade tape to balance and tracked perfect. Great blades HK. Perfect for my Ergo .60!super Preis fuer Scale-MehrblattkopfI should mention that if you plan to use this blades in the HK 600 heli,you need to know that the blade grips of the HK 600 are just a tad shorter and cannot accept these blades as their root is longer. I had to replace the factory screws in the blade grips and use a hex botton head screw instead, and then dremel off the blades a little so that they can fit inthe grips. Be aware of this if you are planing to use them in the new HK600.Excellent quality, amazing price. They feel like more expensive blades and are huge. I will use them for AP jobs in a stretched HK600Superb quality blades and balance right out of the packaging, for the price these are definately recommended, well done HK. I will try the C/F next. -
Upload
Videos -
Upload
Files