New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

900MHZ 1500 mW Tx / Rx y cámara CCD de 1/3 pulgadas NTSC 520TVL

900MHZ 1500 mW Tx / Rx y cámara CCD de 1/3 pulgadas NTSC 520TVL

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000008
WANT FREE SHIPPING? Click here to find out more!
12 sistema de vídeo del canal de 900Mhz Tx / Rx con la cámara CCD.
Un potente 1.5W (1500 mW) alimentado Tx! A diferencia de otros sistemas genéricos, hemos producido un cableado e incluido con la cámara para que el Tx y la cámara serán compatibles y en el mismo voltaje.
Si usted compra su cámara y Tx separado la polaridad enchufe y tensiones pueden ser muy diferentes.

Incluido.
1 x SONY CCD de 1/3 pulgadas de la cámara
1 x 900 Mhz 8 canales transmisor de video (1500 mW)
1 x 12 900Mhz canal receptor de vídeo


Especificaciones de la cámara.
Dispositivo de imagen: 1/3 pulgadas Sony Super HAD CCD de color
Pixel: 752 x 582 (NTSC)
Sincronización: Sincronización interna
Resolución horizontal: 520 líneas de TV
Iluminación mínima: 0.1Lux / F1.2
S / N Ratio: Más de 48dB (AGC OFF / B / W OFF)
El balance de blancos: Seguimiento de balance de blancos automático
Compensación de contraluz automático: Encendido / apagado conmutable
Lente: 3.6-6mm
Voltaje de entrada: DC12V
La corriente eléctrica: 80MA ± 5MA
Obturador electrónico: Auto
PAL: 1/50 a 1 / 100.000 segundos
Salida de vídeo: 1,0 Vp ~ p75Ω
Operación Temp .: -10 ~ + 50
Tamaño: 38 x 38 mm
Fuente de alimentación: 12V / 150mA
 
FPV Tx Espec.
Canal: 8-Ch, la sincronización AV
Potencia: 1500 mW
Voltaje de entrada: 12V
Peso: 18 g
Tamaño: 73x41x14mm
Frecuencia: 0,9 g 0.910G, 0.980G, 1.010G, 1.040G
  • SKU (Número de Referencia) 9171000008
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 665.0000
  • Longitud 185.00
  • Packaging Width 70.00
  • Altura 151.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Everything worked out of the box. The camera was indeed 12V since it has a 78L15 regulator on it. This means that it can accept up to 15V and down the voltage to 5V automatically. The picture was good and no problems so far. Heat wise, the receiver was a bit warm but neither the Tx or the Rx were hot to the touch.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Everything worked out of the box. The camera was indeed 12V since it has a 78L15 regulator on it. This means that it can accept up to 15V and down the voltage to 5V automatically. The picture was good and no problems so far. Heat wise, the receiver was a bit warm but neither the Tx or the Rx were hot to the touch.

Got mine today, works great right out of the box. Did not need to swap any wires and/or add a bec for the camera as mentioned in previous posts. I also purchased a wide angle lens, definitely worth it. :-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got mine today, works great right out of the box. Did not need to swap any wires and/or add a bec for the camera as mentioned in previous posts. I also purchased a wide angle lens, definitely worth it. :-)

My camera came complete and worked the first time I hooked it up without any modifications. I guess that HK was listening to all of your complaints. All that is missing is a 12v BEC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My camera came complete and worked the first time I hooked it up without any modifications. I guess that HK was listening to all of your complaints. All that is missing is a 12v BEC.

Also had to flip red and white wire at the camera. That's why I gave only 4 stars for overall and quality. Once you do that, it does work great though. So again, the wire harness for the camera was wrong on mine (as well as many others it seem!). Simply flip red and white and it does work. Transmitter is very heavy (very heavy case). Receiver has single output (would have been nice to have two).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Also had to flip red and white wire at the camera. That's why I gave only 4 stars for overall and quality. Once you do that, it does work great though. So again, the wire harness for the camera was wrong on mine (as well as many others it seem!). Simply flip red and white and it does work. Transmitter is very heavy (very heavy case). Receiver has single output (would have been nice to have two).

Awesome set-up, did check the wiring before 1st use, everything was ok...

Excellent kit for the money, got to 1KM without a glitch using skew planar & clover leaf antennas....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome set-up, did check the wiring before 1st use, everything was ok...

Excellent kit for the money, got to 1KM without a glitch using skew planar & clover leaf antennas....

1.5 w video out is great for LR FPV, gr8 product

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

1.5 w video out is great for LR FPV, gr8 product

of the start i checked that the unit powered up . then after it did i removed the case and covers from the circuitry for a once over and all looked fine. at first glance the unit appeared to be a refurbished one. with a few new resistors and some flux still on the board , after an alcohol wash it was good to go back to the case. but i did add some thermal grease to the transmitter side opposite the led display , so better heat transfer could occur and less chance of overheating . dont forget to install he wedges on the led side to push it towards the thermal paste :)
there really was no difference between this and the other brands i own that have the same cases . for the price it was a fair deal. buy they really need to make everyone aware about the wiring harness issue for the camera !!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

of the start i checked that the unit powered up . then after it did i removed the case and covers from the circuitry for a once over and all looked fine. at first glance the unit appeared to be a refurbished one. with a few new resistors and some flux still on the board , after an alcohol wash it was good to go back to the case. but i did add some thermal grease to the transmitter side opposite the led display , so better heat transfer could occur and less chance of overheating . dont forget to install he wedges on the led side to push it towards the thermal paste :)
there really was no difference between this and the other brands i own that have the same cases . for the price it was a fair deal. buy they really need to make everyone aware about the wiring harness issue for the camera !!

Purchased this setup and received my order in the USA in 10 days from order. I swapped the red and white wire going to the camera on the harness, applied 11.3 volts to it from a 3S LiPo and it works great. Clear picture!! The transmitter case is very very nice. I have not yet tested the range with the stock antennas, but I will update this soon when I do. Great Job!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased this setup and received my order in the USA in 10 days from order. I swapped the red and white wire going to the camera on the harness, applied 11.3 volts to it from a 3S LiPo and it works great. Clear picture!! The transmitter case is very very nice. I have not yet tested the range with the stock antennas, but I will update this soon when I do. Great Job!!

THIS DOES WORK! OK, so I ordered this product a couple months ago, and up until yesterday I was stumped. I have finally got it working! IN ORDER TO MAKE THIS WORK, YOU MUST SWITCH THE RED AND WHITE WIRES TO THE CAMERA. THE BLACK WIRE IN THE MIDDLE STAYS IN THE MIDDLE. YOU CAN DO A QUICK TEST OF THIS BY PLUGGING IN THE CAMERA CONNECTOR UPSIDE DOWN. THERE IS SOME METAL FOR THE ELECTRICITY TO THROUGH. SO JUST TAP IT DOWN ON TO THE PINS AND BE AMAZED!!! I GOT A CLEAR PICTURE ON MY TV SCREEN FROM THE TX TO THE RX. I do not believe a voltage regulator is necessary. Like this so people can be informed!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

THIS DOES WORK! OK, so I ordered this product a couple months ago, and up until yesterday I was stumped. I have finally got it working! IN ORDER TO MAKE THIS WORK, YOU MUST SWITCH THE RED AND WHITE WIRES TO THE CAMERA. THE BLACK WIRE IN THE MIDDLE STAYS IN THE MIDDLE. YOU CAN DO A QUICK TEST OF THIS BY PLUGGING IN THE CAMERA CONNECTOR UPSIDE DOWN. THERE IS SOME METAL FOR THE ELECTRICITY TO THROUGH. SO JUST TAP IT DOWN ON TO THE PINS AND BE AMAZED!!! I GOT A CLEAR PICTURE ON MY TV SCREEN FROM THE TX TO THE RX. I do not believe a voltage regulator is necessary. Like this so people can be informed!

THE CAMERA WAS DEAD ON ARRIVAL.. I USED 5VOLTS FIRST THEN 8.4 THEN 12.6...NO LUCK I HAD TO USE A SECURITY CAMERA FOR NOW.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

THE CAMERA WAS DEAD ON ARRIVAL.. I USED 5VOLTS FIRST THEN 8.4 THEN 12.6...NO LUCK I HAD TO USE A SECURITY CAMERA FOR NOW.

  1. 1
  2. 2
Customer files
frontside camera Download [910]
backside camera Download [873]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!