Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

900MHZ 200mW Tx / Rx y cámara CCD de 1/3 pulgadas NTSC 520TVL

Generating Links

900MHZ 200mW Tx / Rx y cámara CCD de 1/3 pulgadas NTSC 520TVL

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9171000009
¿Envío gratis? ¡Haga clic aquí! aprender más!
12 sistema de vídeo del canal de 900Mhz Tx / Rx con la cámara CCD. Grande para los sistemas FPV en países con potencia de salida de RF menos restrictiva.

A diferencia de otros sistemas genéricos, hemos producido un cableado e incluido con la cámara para que el Tx y la cámara serán compatibles y en el mismo voltaje.
Si usted compra su cámara y Tx separado la polaridad enchufe y tensiones pueden ser muy diferentes.

Incluido.
1 x SONY CCD de 1/3 pulgadas de la cámara
1 x 900 Mhz 4 canales transmisor de video (200 mW)
1 x 12 900Mhz canal receptor de vídeo


Especificaciones de la cámara.
Dispositivo de imagen: 1/3 pulgadas Sony Super HAD CCD de color
Pixel: 752 x 582 (NTSC)
Sincronización: Sincronización interna
Resolución horizontal: 520 líneas de TV
Iluminación mínima: 0.1Lux / F1.2
S / N Ratio: Más de 48dB (AGC OFF / B / W OFF)
El balance de blancos: Seguimiento de balance de blancos automático
Compensación de contraluz automático: Encendido / apagado conmutable
Lente: 3.6-6mm
Voltaje de entrada: DC12V
La corriente eléctrica: 80MA ± 5MA
Obturador electrónico: Auto
PAL: 1/50 a 1 / 100.000 segundos
Salida de vídeo: 1,0 Vp ~ p75Ω
Operación Temp .: -10 ~ + 50
Tamaño: 38 x 38 mm
Fuente de alimentación: 12V / 150mA
 
FPV Tx Espec.
Canal: 4-Ch, la sincronización AV
Potencia: 200mW
Voltaje de entrada: 12V
Peso: 18 g
Tamaño: 31 x 88 x 8 mm
Frecuencia: 0,9 g 0.910G, 0.980G, 1.010G, 1.040G
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

valerian | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 18, 2016

Ran 20 min with white red reversed. Board was powered through the Video out pin.
It survived and going strong after I noticed the Video signal goes to a diode and and ground is middle.
Plug came out with the header's plastic so reversing it was a breeze.

Quality is good, will be used with a low quality capture board for live view so video quality does not matter.

Pin 1 of channel dip switch means channel two for some reason.

Joseph | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 12, 2016

4 stars in overall rating because the red-black-white cable going to the camera is still messed up. Even after years of having this problem they still haven't fixed it. I got mine spring of 2016 and still had to cut the red and white wires and switch and splice them together. I would recommend if you buy this, try the one channel setting on the tx and cycle through the channels on the rx. If you don't get picture I guarantee you it's because you have to switch the red and white wires. After I made the switch though, it works like a charm. Blows my mind why it's still shipped out like this.

| Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 31, 2015

Works really well, just make sure that your transmitter and receiver are on the same channel and the antaneas are pointing in the same direction. The plug on the back of my camera came upside down, so if yours isn't working just slip the connector on the back off the pins and reorienthe it. For the price and the picture quality, it is great. Get a 150 degree 1/3" lens and it is an amazing setup. 4 stars only because my camera came a bit messed up, but as described above it was an easy fix.

| Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 25, 2014

I received this system not too long ago and it is much better quality than I thought. The video is great. I even plugged it into my 50 inch plasma and was pleasantly surprised at the quality. The connectors are SMA which isn't clear in the description. Recommend.

otep78 | Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 12, 2014

Very good TX-RX and camera for FPV and great price

David | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Mar 12, 2014

Came with wires reversed. Maximum effective range is 100 meters without changing antennas. Video Transmitter is really underpowered. Receiver works great. Camera lenses are plastic so I suggest you buying wide angle glass lenses. Camera works perfectly. Otherwise you can't beat that price

Michael | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jan 04, 2014

Just received my kit today. Like many of the other customers, my unit does not function. My troubleshooting has also tracked back to the Tx/camera/harness. I'll have to return. Sigh. Being a business owner, I know QC is very important. There was no documentation/QC card with this unit. HobbyKing do you have a standardized QC check on these products before they go out? Given the complaints listed here you should; this isn't right.

Jeremy | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Aug 21, 2013

This thing is crap! i got one flight out of it before it quit working. and the range is horrible! don't waste your money. transmitter doesn't work anymore, poorly made, and the antenna snapped right off. tried to resolder but i only get about a 10 ft range now and the video signal is weak. trashing this POS

Jeandredubois | Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 27, 2013

Best fpv combo out there. Rx is very light so not much extra weight is addes onto plane/quad. Just wish HK would stock 900mhz cloverleaf antennas. My range is 800m LOS (OSD) but I know with cloverleaf range will be 2kmplus so please HK also stock 900mhz Cloverleaf antennas

Ian | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 10, 2013

I am very impressed! First off: some technical information:

THE RECEIVER is center pin positive. It has a diode in the case so if you hook it up incorrectly it should be OK. It will work with 9v but the picture is a bit messed up like there are these lines of blur that showed up on my screen. Was picking up what the camera transmitted though! Use 12v for good picture.

The CAMERA: is 720p so it is widescreen and looks best on wide TVs. If you have a square TV get a regular cam as you won't have the same field of view and the regular camera looks almost as good on a square tube TV. The regular cam has markings on the board so you can see if you need to reverse the wires. This camera has no markings at all. ON THE CONNECTOR: the center pin is negative. The positive pin has a SMD diode (black chip with a slight white line ) on the camera side of the board, right after it connecting to the trace from the pin. The signal pin is not connected to anything on the camera side of the board. Sure it is soldered but the pad is isolatedthere are no traces connecting to it. It is connected only to the chips on the bottom the bottom. You may need a magnifying glass to see this...my board was blue and hard to see where traces began and ended. This should make it easy to tell if you need to reverse the wires on your connector.

ON THE TRANSMITTER, the yellow wire is for video and the white i

  1. 1
  2. 2
Archivos de clientes
Manual Download [1989]
Channel Download [1]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!