New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

900MHZ 800mW Tx / Rx y cámara CCD de 1/3 pulgadas * 520 PAL

900MHZ 800mW Tx / Rx y cámara CCD de 1/3 pulgadas * 520 PAL

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000004
WANT FREE SHIPPING? Click here to find out more!
12 sistema de vídeo del canal de 900Mhz Tx / Rx con la cámara CCD.
Un sistema de alta potencia TX de largo alcance, video claro.

* Esta versión cuenta con 520 PAL-line

A diferencia de otros sistemas genéricos, hemos producido un cableado e incluido con la cámara para que el Tx y la cámara serán compatibles y en el mismo voltaje.
Si usted compra su cámara y Tx separado la polaridad enchufe y tensiones pueden ser muy diferentes.

Incluido.

1 x SONY CCD de 1/3 pulgadas de la cámara
1 x 900 Mhz 8 canales de vídeo transmisor (800 mW)
1 x 12 900Mhz canal receptor de vídeo


Especificaciones de la cámara.
CCD tipo de sensor: 1/3 de color CCD de SONY
pixel;
NTSC: 510 (H) * 492 (V)
PAL: 520 (H) * 582 (V) (incluido)
Sistema de la exploración: exploración entrelazada
Sincronización: Sistema: Inter
Resolución horizontal: 420TV línea
Iluminación mínima 0.01Lux / F1.2
DSP + CCD: CXD3142R + 405AK
S / N Ratio: 48dB
Modificación gamma: 0,45
El balance de blancos: Auto
compensación de contraluz Auto: Auto
Lente: 3,6 mm
Audio: No
Voltaje de entrada: 9 ~ 12,6 V
80MA corriente eléctrica
Obturador electrónico: 1/50 (60) ~ 1 / 100.000 s
La salida de vídeo: vídeo compuesto 1.0VP-P
Operación Temp .: -20 ~ 50
Tamaño: 38 * 38mm
Tiempo de vuelo: Aprox 60min / 100mAh 3S
 
FPV Tx Espec.
Canal: 8-Ch, la sincronización AV
Potencia: 800mW
Voltaje de entrada: 12V
Peso: 18 g
Tamaño: 53x45x19mm
Frecuencia: 0,9 g 0.910G, 0.980G, 1.010G, 1.040G
  • SKU (Número de Referencia) 9171000004
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 549.0000
  • Longitud 185.00
  • Packaging Width 70.00
  • Altura 150.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I received this today and for the money it's a very good system (yet to range test) but video quality specially with the circular polarised antennas is great.
What I don't understand is why hobbyking don't put a note about the camera wiring , people will short there system out and it's not that it was not reported .. Why HK just print a note to turn the camera connector.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received this today and for the money it's a very good system (yet to range test) but video quality specially with the circular polarised antennas is great.
What I don't understand is why hobbyking don't put a note about the camera wiring , people will short there system out and it's not that it was not reported .. Why HK just print a note to turn the camera connector.

Waiting for my shipment to arrive, once it is i will check the range and will update soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Waiting for my shipment to arrive, once it is i will check the range and will update soon

Best kit all in one.
The 1/3 520 cam is correct. It heats a lot.
800 mw transmitter is enough to go above 1 km with stock antenas. I 'v tried 1500mw, but that was to much power, that interfered with my 2,4 GHZ frsky conf (transmitter with a 2W wifi booster).
Remove the gold case, and with a small heat sink glued on it, you'lll save weight and space !
I plugged a low pass 900 Mhz filter bitween video transmitter and antenna, wich was very efficient to get less interferences.

HK : could you sell low pass 900 filters ans wifi boosters ?

I've got two recievers, and use them with the eagle eye view ground station (diversity), and this is perfect for optimum reception.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best kit all in one.
The 1/3 520 cam is correct. It heats a lot.
800 mw transmitter is enough to go above 1 km with stock antenas. I 'v tried 1500mw, but that was to much power, that interfered with my 2,4 GHZ frsky conf (transmitter with a 2W wifi booster).
Remove the gold case, and with a small heat sink glued on it, you'lll save weight and space !
I plugged a low pass 900 Mhz filter bitween video transmitter and antenna, wich was very efficient to get less interferences.

HK : could you sell low pass 900 filters ans wifi boosters ?

I've got two recievers, and use them with the eagle eye view ground station (diversity), and this is perfect for optimum reception.

Hello,

I also had to rewire the camera wires. The red and signal were reversed on the plug.

I have'y mounted it on anything yet. Will mount this on a quad or a 68" Super Star.

Patrick

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello,

I also had to rewire the camera wires. The red and signal were reversed on the plug.

I have'y mounted it on anything yet. Will mount this on a quad or a 68" Super Star.

Patrick

Review 2: I found a small plastic box at my electrical store. 40mm x 40mm x 20mm, that fitted the camera perfect. If you trim the outer rim of the camera circuit board off and carefully drill out two of the mount holes to 3mm, the screws that hold the lid on, fit thru the circuit board. Remove about 3mm from the box screws bosses, dremel a hole to match the camera front, and it all fits great. Drill some air holes front and back, and is easily mounted. I also built a mounting platform with the TX and camera on. Total weight of camera box, TX and mount is about 86grm, a less than the units with the supplied TX gold cover. Hope this helps
rogerbsstt

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review 2: I found a small plastic box at my electrical store. 40mm x 40mm x 20mm, that fitted the camera perfect. If you trim the outer rim of the camera circuit board off and carefully drill out two of the mount holes to 3mm, the screws that hold the lid on, fit thru the circuit board. Remove about 3mm from the box screws bosses, dremel a hole to match the camera front, and it all fits great. Drill some air holes front and back, and is easily mounted. I also built a mounting platform with the TX and camera on. Total weight of camera box, TX and mount is about 86grm, a less than the units with the supplied TX gold cover. Hope this helps
rogerbsstt

Unit arrived well packaged. No instructions. Removed the gold box from the transmitter and added a heat sink from an old esc to the back of the tin box of the receiver, stuck on with heatsink glue. Had to reverse the plug wires on the camera by carefully prising off the plastic plug outer from the circuit board pins with a blade, reversed it and carefully replaced it back on the pins. This puts the red wire to the right when looking at the back of the camera board with the plug at the bottom. Had to use a 3s lipo battery to get this to work as the current needed is more than a normal 9v battery has. Picture is solid and clear. Will try on a plane soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Unit arrived well packaged. No instructions. Removed the gold box from the transmitter and added a heat sink from an old esc to the back of the tin box of the receiver, stuck on with heatsink glue. Had to reverse the plug wires on the camera by carefully prising off the plastic plug outer from the circuit board pins with a blade, reversed it and carefully replaced it back on the pins. This puts the red wire to the right when looking at the back of the camera board with the plug at the bottom. Had to use a 3s lipo battery to get this to work as the current needed is more than a normal 9v battery has. Picture is solid and clear. Will try on a plane soon.

decent kit, no instructions on operation, and no power supply...supplied.
video quality as expected, no stupid fisheye effect is a plus.

FYI, transmitter camera weigh a total of 92g

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

decent kit, no instructions on operation, and no power supply...supplied.
video quality as expected, no stupid fisheye effect is a plus.

FYI, transmitter camera weigh a total of 92g

best all in one kit on the market today very good range on stock antennas.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

best all in one kit on the market today very good range on stock antennas.

To get mine going I had to switch the red and white wires around on the plug into the camera. Works great now. The system seems to go well so far. The RX required a 12volt 500mA positive center power supply and works well so far. I used a Turnigy Li-Po 3S 500mA battery to run the camera and transmitter. I could tell the camera wasn't going properly but the transmitter wasn't because there was a black picture instead of static when I first hooked it up. I hope this review saves people the time I wasted to get it going. As always, hobbyking is the best.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

To get mine going I had to switch the red and white wires around on the plug into the camera. Works great now. The system seems to go well so far. The RX required a 12volt 500mA positive center power supply and works well so far. I used a Turnigy Li-Po 3S 500mA battery to run the camera and transmitter. I could tell the camera wasn't going properly but the transmitter wasn't because there was a black picture instead of static when I first hooked it up. I hope this review saves people the time I wasted to get it going. As always, hobbyking is the best.

Great Product. The Video Tx/Rx will work with an NTSC camera and monitor. Good reception and great range. Even with Stock antenna's. Will be switching cameras and receiver antenna to increase range and clarity.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Product. The Video Tx/Rx will work with an NTSC camera and monitor. Good reception and great range. Even with Stock antenna's. Will be switching cameras and receiver antenna to increase range and clarity.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!