9306MG Metal Gear Servo 7,4 g / 1,5 kg / .16sec, Mini servo ultra delgado.
Peso: 10,0 g
Dimensiones: 22 x 25 x 12 mm
Torque @ 4.8V: 1,1 kg-cm
@ 4.8V Velocidad: 0.16sec / 60 grados @ sin carga
Cojinete de bolas: Un cojinete de bolas en la parte superior
Tipo de engranaje: Metal Gear
SKU (Número de Referencia):
Peso ( g)
Velocidad ( Sec / 60 grados )
Par ( kg ) ( min . 0,01 kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
F ( mm )
- SKU (Número de Referencia):
Nice little servo's, not used as yet thoughOrdered this servo 2 times - and got different kind of servo .. this one with
12mm and smaller ones with 10mm ... both are not very good ...
the first 12mm i have used died after 3rd time of action. the two other have
problems to remember zero-position after power of and on.
the smaller ones are very slow. when they return to zero-position, the first 4/5
of the way will be done fast, but the last bit takes nearly a second ...
one more bad experience with rc-scanner products; i will not buy things of
this brand anymore ...
Terrible servo and service. Out of 4 i ordered, 3 were a different model. Same part number but totally different. They asked me to take a tone of pictures to show them the difference then to send them back!!! not really worth my time. So i tried to use the sevos. Three out of the four total failed right away. Fist one was DOA, second the gears don't mesh and slipped! third jittered badly. i will not be trusted HK for their servoes again, and have warned the 200 members of my club, giving a full demo of the problems. I ask then to resend 3 correct servoes but they will not until they have the other s back. I dont have the time to play games. Typical cut rate customer service. IF THESE HAD GONE IN A MODEL THE MODEL WOULD HAVE BEEN DESTROYED FIRST FLIGHT!Su peso real son 12 gramosThe servo is ok for the price, good torque and feel, but be carefull with the case, as it's holded by the plastic stripe only and not with screws. I glued one with CA and the glue evaporated through the case locking completely the gearsBeim testen,vor dem Einbau, schon kaputt!
Ich habe schon mehrere Artikel bei Hobby King bestellt,dies war der erste Artikel der defekt war.light and accurate! good choise for metal headsvery good servo using in a trex 450 xlI used their servomotor for swa 28, excellent a version from the servomotorrhg srthtr hnbtbs trb tsrnzjrdtjnhhtsrfhg ydg ydrgbs trxfhftdrgy grvs thts htsh st hst hsh st h