New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

A20m sin escobillas Outrunner Motor con el montaje de madera y fijación incl

A20m sin escobillas Outrunner Motor con el montaje de madera y fijación incl

Discontinued Product

Please continue searching for a similar product.
SKU:
074000164
WANT FREE SHIPPING? Click here to find out more!

Motor sin escobillas A20m outrunner con madera de montaje y fijación incl


Especificaciones:
Dimensiones: 23mm x 23mm
Longitud total: 32 mm
Peso: 20 g
Diámetro del eje: 3 mm
KV: 2000 rpm / v
Max Voltaje: 8.4v (2s)
Amps max: 12A
Max Power: 90w

  • SKU (Número de Referencia) 074000164
  • Brand -
  • Peso 38.0000
  • Longitud 70.00
  • Packaging Width 20.00
  • Altura 50.00
  • Kv (rpm / v) 2000.00
  • Corrientes max (A) 12.00
  • Resistencia ( MH ) 320.00
  • Max Voltaje ( V ) 8.00
  • Potencia ( W ) 90.00
  • Un eje ( mm ) 3.00
  • B Longitud ( mm ) 23.00
  • C Diámetro ( mm ) 23.00
  • Puede longitud D ( mm ) 12.00
  • Longitud Total E ( mm ) 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Pro: It is a very powerfull little motor! I use it in a small highspeed plane with a Graupner 5x4 prop, 450mAh 3S LiPo and 20A esc. It produces around 350g thrust at 11amps and around 120-130 Watts. And it doesnt even get too got!
Contra: The bearings are very cheap. Mines were noisy from the factory. Also the bottom end bearing has too much play. The prop holder screws are too close to the bell. You cant push a big o-ring over them. And you have to shorten the shaft in order to get a working propsaver. Also it isnt very well balanced and it keeps vibrating at high rpm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pro: It is a very powerfull little motor! I use it in a small highspeed plane with a Graupner 5x4 prop, 450mAh 3S LiPo and 20A esc. It produces around 350g thrust at 11amps and around 120-130 Watts. And it doesnt even get too got!
Contra: The bearings are very cheap. Mines were noisy from the factory. Also the bottom end bearing has too much play. The prop holder screws are too close to the bell. You cant push a big o-ring over them. And you have to shorten the shaft in order to get a working propsaver. Also it isnt very well balanced and it keeps vibrating at high rpm.

Customer files
Multiplex Fox Download [386]
Multiplex Fox Download [451]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!