Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

1100kv A28M sin escobillas Outrunner

Generating Links

1100kv A28M sin escobillas Outrunner

Precio:

Now save ahorra 0,00 € 0,00 €

8,85 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
A28M-1100kv
¿Envío gratis? ¡Haga clic aquí! aprender más!

1100kv A28M sin escobillas Outrunner

Presupuesto:
Modelo: A28M
Peso: 48g
Dimensiones: 25 x 28
Voltaje: 7.2V ~ 11.1v, 2S ~ 3S Lipo
KV: 1100rpm / v
Eje: Diámetro 3mm
Carga máxima: 27A
Max Watts: 270W
Sugerido hélice: 8x4.3, 9x4.7, 10x4.7

  • Kv (rpm / v) 1100.00
  • Corrientes max (A) 27.00
  • Resistencia ( MH ) 0.00
  • Max Voltaje ( V ) 11.00
  • Potencia ( W ) 270.00
  • Un eje ( mm ) 3.00
  • B Longitud ( mm ) 25.00
  • C Diámetro ( mm ) 28.00
  • Puede longitud D ( mm ) 14.00
  • Longitud Total E ( mm ) 40.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Phoenix-II | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 01, 2016

A piece of sh!t, a lot of vibrations, too much to be balanced by myself. You'd rather put some $ more to get a good motor. Don't buy this one

Ivan | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2014

I have bough 7 of this motors. They seems to work well, but they have one problem: the shaft of the motor breaks very easily. Other motors that I have are harder.

Halcyon25 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 02, 2013

I would Strongly NOT recommend this motor to any newer flyer... I have ordered 2 of these and each time after 3 or 4 hard landings, the shaft breaks... I took the second motor out on its first flight today and had some great flights, 4 smooth landings and 2 hard landings, on grass, the shaft sheared in the same spot as the first...
I have no complaints against the performance, I have it paired with a BlitzRC 20amp esc and a 2000mah 7.6v lipo and it has no problems pulling my modified foam chuck glider at 35pcnt throttle...

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 30, 2013

Engine very good, mainly because it comes with the amount, do not forget to buy the Spint ok for him.

FERNIMANN | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 26, 2013

Muy buen motor a un precio excelente

vaughan | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 19, 2013

The smallest of my powerful motor fleet. What these little things do is efficiency at it's best!

EROSFLY | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 02, 2013

Estou pagando pra ver este aqui tambem, como o 2822 esta em falta, vamos ver se aqui da conta do recado e nao vai morre na praia.KKK

eagle50 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 01, 2012

very bad quality I bought 5 for a quadrycopter 1 shaft was 2.8mm and 4 shafts 2.9mm: very hard to fix colet propeller holder and result is a lot of vibration 'cause they are not centered. bearing on bell side are loose ( if you take off the bell they are falling off) thus increasing vibration.

shaft breakes very easily

byrne1157 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 19, 2011

Seems to be well built, But doesn't live up to the specs listed here. This motor produced the following numbers on a 3s 2200mah battery: 8x3.8 prop 8550rpm,8.12amps,97.5 watts. 8x6 prop, 5790rpm,11.3amps,134watts. 9x6 prop, 6480rpm, 11.83amps, 144watts. This motor is not at fault, it gets VERY warm trying to do what it should,but cannot. This motor is nowhere near 270 watts as advertised. Hobby King, yo ushould step up and send me a replacement, or give me account credit for this motor so I can order a replacement, at no cost to me. That would be the most excellent customer service!!!

nihil | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 28, 2011

i received 5 motors I bought, tested and found:
1-Stator CDRom 9 tooth, star connection,
2-Internal resistence = 0,1886 Ohm,
3-Io (7,64V) 0,55A,
4-Kv 970 ONLY!!!
5-The groove cut in the shaft for the snap ring is too deep and the concordance in the botton ara too sharp (used magnifier), hence prone to stress failure, as reported by other fellows.
6- Whem You drain more than 140 w (13,1A / 3S) the thongs get hot.
7- I will give tham free to fellows that need less than 140W with bigger props
SORRY, HC.

  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!