New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Paquete de accesorios para TR2213 / 20

Paquete de accesorios para TR2213 / 20

Shipped From:
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

3,67 €
Estado:
En stock
SKU:
031000154
WANT FREE SHIPPING? Click here to find out more!

Paquete de accesorios para TR2213 20 de motor /.


paquete estándar de accesorios para los motores TR22. Todo lo que necesitas está incluido con tubo retráctil, conectores macho y hembra de bala, montaje transversal, eje de repuesto, montajes apoyo, tornillos, y mucho más.

Todos los componentes de alta calidad

Especificaciones:
Diámetro del eje: 3 mm
Longitud del eje: 45mm
Cross orificios de la placa de pernos: 34mm
Prop tamaño del eje del adaptador: 4,9 mm x 19 mm

  • SKU (Número de Referencia) 031000154
  • Brand -
  • Peso 28.0000
  • Longitud 70.00
  • Packaging Width 15.00
  • Altura 45.00
  • Kv (rpm / v) -
  • Corrientes max (A) -
  • Resistencia ( MH ) -
  • Max Voltaje ( V ) -
  • Potencia ( W ) -
  • Un eje ( mm ) -
  • B Longitud ( mm ) -
  • C Diámetro ( mm ) -
  • Puede longitud D ( mm ) -
  • Longitud Total E ( mm ) -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

great kit has all of the proper fittings

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great kit has all of the proper fittings

I've a number of these on various quads, hexas and octos. I use them with the D2830/11 1000Kv Turnigy Aerodrive motors. They are a bit better than the standard prop adapters that come with those motors, although I've never had a problem with the standard adapters, either. Chances are you will have one screw in the bunch that won't drive all the way into the adapter. This happens to me on almost every one of these that I've ordered. What I usually to to mitigate this problem is to use the blue flanged washer (it's on the right hand side of the picture) that comes in the kit, and place it on the shaft, small side down. This ensures that the prop lies flat, instead of being cocked at an angle. I have had one of these come loose during a flight, and if I hadn't been very close to the ground, I probably would have lost my Nex5, the lens, a full FPV system and most of the quad. Be aware of this. It was checked for tightness the night before, so just be careful.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've a number of these on various quads, hexas and octos. I use them with the D2830/11 1000Kv Turnigy Aerodrive motors. They are a bit better than the standard prop adapters that come with those motors, although I've never had a problem with the standard adapters, either. Chances are you will have one screw in the bunch that won't drive all the way into the adapter. This happens to me on almost every one of these that I've ordered. What I usually to to mitigate this problem is to use the blue flanged washer (it's on the right hand side of the picture) that comes in the kit, and place it on the shaft, small side down. This ensures that the prop lies flat, instead of being cocked at an angle. I have had one of these come loose during a flight, and if I hadn't been very close to the ground, I probably would have lost my Nex5, the lens, a full FPV system and most of the quad. Be aware of this. It was checked for tightness the night before, so just be careful.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!