Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

1100kv ADH300L sin escobillas Outrunner

1100kv ADH300L sin escobillas Outrunner

Now save guardar 0,00 € 0,00 €

10,78 €
Sin existencias!
Stock:
OUT OF STOCK
Peso:
55 g
SKU:
ADH300L

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

1100kv ADH300L sin escobillas Outrunner

Presupuesto:
Modelo: ADH300L
Peso: 39g
Dimensiones: 23 x 23
Voltaje: 7.2V ~ 11.1v, 2S ~ 3S Lipo
KV: 1100rpm / v
Eje: Diámetro 3mm
Carga máxima: 15A
Max Watts: 170W
Sugerido hélice: 8X4.3, 9X4.7, 10X4.7

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    ADH300L
  • Brand:
    N/A
  • Peso ( g)
    55.00
  • Longitud
    70.00
  • Ancho:
    25.00
  • Altura:
    50.00
  • Kv (rpm / v)
    1100.00
  • Corrientes max (A)
    15.00
  • Potencia ( W ):
    170.00
  • B Longitud ( mm ):
    23.00
  • Puede longitud D ( mm )
    17.00
  • Max Voltaje ( V )
    11.00
  • Un eje ( mm ):
    3.00
  • Unit Weight (g):
    39
  • C Diámetro ( mm )
    23.00
  • Longitud Total E ( mm )
    40.00
  • Resistencia ( MH ):
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Muy buen motor lo tengo un planeador de 600grs y lo lleva sobrado
Quality
Value
Overall
Quality
Value
Overall
Don't be fooled by the lack of a brand name. An extremely modest little motor.
Quality
Value
Overall
Quality
Value
Overall
Very efficient motor. Use these props only when on 3s.


8x4 electric direct drive or 8x4.3 slow flyer.

If you go 9inch, go to only 9x5 electric direct drive, not slow flyer! The gws 9x5 is max you should go on 3s.
Quality
Value
Overall
Quality
Value
Overall
This motor is extremely powerful, very smooth running and responsive. I have no regrets with this purchase. However, the shaft broke off when I crashed under power. I can't yet find a replacement shaft. This is a good motor for the price.
Quality
Value
Overall
Quality
Value
Overall
This motor is a great 2s motor. I used mine with 9x4.7sf prop 350 3s 15c, and 620 3s 15c, but when I upgraded to a Nanotec 850 3s 25/45c the motor BURNT OUT. Remember the higher the cell count the smaller the prop to get the same watts. That being said I ordered 2 more motors and some 2s Nanotec 850 2s 25/45c batteries and 9x4,7sf props.
Quality
Value
Overall
Quality
Value
Overall
I have put given motor ADH300L Brushless Outrunner 1100kv on Kinetic 600. When I begin use it I will glad use it. Power is good . Kinetic is fly as bullet.

After few flyes I notice what controller begin hots and as a result 18A controller is burn. I disassemble motor and see what rotor brush stator , on stator furrow. This is because of poor fastening rotor with axis motor and bad metal material of rotor, hole is knock. Axis is not bent. Axis swinging in rotor.

Good motor as idea, but poor materials and poor quality.

I disappoint. Not recommend buy it.
Quality
Value
Overall
Quality
Value
Overall
I have put given motor ADH300L Brushless Outrunner 1100kv on Kinetic 600. The axis has been turned concerning regular position. It is necessary to pierce deepening in an axis under the screw a fixing rotor.

Holes have approached ideally. Flies Kinetic with this motor very well, draft suffices for launch vertically upwards.

The controler 18A is heated with the given motor, I have put turnigy 30, it isn't heated

ADH300L Brushless Outrunner 1100kv Kinetic 600. . .

Quality
Value
Overall
Quality
Value
Overall
I bought 2, used one to replace a geared 5:1 brushed 280, the other to replace a geared 5:1 brushed 370. This motor is about half the weight of the motors ithey replaced. Used a 25 amp brushless esc (I already had them) This motor likes 3s with a 9.47sf prop the best about 7000rpm, 120 watts about 21 oz thrust. 3s 10.47sf prop about 5000 rpm, 155 watts, 20 oz thrust and gets a bit too hot (for me). Mine had the second e-ring grove so I could put the shaft out the other side. Support the hub near the shaft when pressing out the shaft or you will have to get 2 small v block and a dial indicator to straighten the bell.
Quality
Value
Overall
Quality
Value
Overall
Very good motor! Prop GWS 8x4 3s-610mAh, with flying time about 6 minute. The punch is higher when using 30C
Quality
Value
Overall
Quality
Value
Overall
Bought this as the Kinetic 800 replacement motor was not available. Alas the motor is mounted reverse to what it needs to be for the Kinetic/Merlin.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.