Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

2400kv ADH300S sin escobillas Outrunner

Generating Links

2400kv ADH300S sin escobillas Outrunner

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
ADH300S-2400k
¿Envío gratis? ¡Haga clic aquí! aprender más!

2400kv ADH300S sin escobillas Outrunner

Presupuesto:
Modelo: ADH300S
Peso: 21g
Dimensiones: 14 x 23
Voltaje: 7.2V ~ 11.1v, 2S ~ 3S Lipo
KV: 2400rpm / v
Eje: Diámetro 3mm
Carga máxima: 15A
Max Watts: 100W
Propulsor sugerida: 6x3, 7x3.5 [7.2V]

  • Kv (rpm / v) 2400.00
  • Corrientes max (A) 15.00
  • Resistencia ( MH ) 0.00
  • Max Voltaje ( V ) 11.00
  • Potencia ( W ) 100.00
  • Un eje ( mm ) 3.00
  • B Longitud ( mm ) 14.00
  • C Diámetro ( mm ) 23.00
  • Puede longitud D ( mm ) 9.00
  • Longitud Total E ( mm ) 32.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

QuadroMania | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jul 12, 2016

bought this motor voor a depron flyer, the motor mount is from wood not glasfieber like the foto, it wil break verry easely verrrrrry thin wood.

CharlySub | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Mar 01, 2015

I use this motor with 4.75x4.75 prop and a flycolor 15 A esc. All works fine and motor and esc are not going hot.

Saios | Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 13, 2011

Replaced the stock motor on a HK mini swift. Had to work hard to make it fit. Make sure you don't use the stock ESC(6amp) Will fry pretty quick. Go for a 15-20 at least. Powerful little motor. Motor mounts on the flat motor mount provided. Not really easy to use in most applications. Had to improvise with balsa wood and a bottle cap.. Impressive result though.

SLOW STIK | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Sep 20, 2011

I have found with all motors from H.K. that a quick dis-assembly, an inspection of all the components such as windings, magnets, bearings and a general look over to make sure everything is right. When you find everything OK then take a little time to oil the bearings. Just a few drops makes a big difference in the bearing tube.. I use the oil you can get from a Hobby supply or even Radio Shack ! Its about a 30 weight non detergent with a pin applicator... Smooths the bearings and they will last A LOT longer ! Works great for me every time..

Anees | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jun 08, 2011

I m using 3s 1000mah lipo with 20A ESc 5x4.5 prop but the motor is getting very hot almost going to burn so i stopped it also esc is getting hot, can any one help is it ok. Plz help

Guy Hanoch | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jun 05, 2011

Great motor for VPP

I use it on 150g middle motor VPP foamy with 8" carbon blades , Trex450 tail grips and VPP hardware (blades and hardware from Slowflyworld.de)



working great! little warm but the trust is more then OK.

batterys are TP 325 45C



improtent!! i replaced the shaft with 3mm hollow shaft for this use

| Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 13, 2011

I use this motor for my depron F-22 with 6*4 prop 20 Amp ESC 1200 amh 3S and it`s scoots around. good motor, only the wires are very fragile

Cliente | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Apr 11, 2011

Great little motor but take care as always with the mounting screws. I bought two of these motors and the screws supplied were varying lengths. Some 4mm some 6mm. If you screw the 6mm screws in with the thin fiberglass mount you will destroy the windings. Bit of a waste for the sake of a correct length screw. Hobbyking need to take note also. You probably want to try a bit smaller prop too, I ran a 6 x 3 prop on a 3 cell and it pulled a full 20 amps. Cut it down to to around 5 1/4 x 3 and it was down to 14 amps. It was a quite chunky master airscrew prop so i have ordered some finer GWS 5 x 3 and 6 x3 props to try

Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!