New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Controlador afro ESC 20Amp del Multi-rotor de velocidad del motor (SimonK firmware)

Controlador afro ESC 20Amp del Multi-rotor de velocidad del motor (SimonK firmware)

Now save guardar 0,00 € 0,00 €

10,02 €
Estado:
Sin existencias!
SKU:
9192000131-0
WANT FREE SHIPPING? Click here to find out more!

Desarrollado desde el principio, queríamos construir un verdadero multi-rotor específica CES que ofrezca el mejor rendimiento y valor en el mercado hoy en día. Habíamos borrado limpio y cuidado a la comunidad en busca de inspiración y ayuda en el diseño de un CES que realmente podría ser conocido como "El Multi-rotor ESC"

Introduzca Simon y Hamasaki También conocido como SimonK y Timecop. Esta combinación de hardware y firmware experiencia en conjunto con el equipo de ingeniería Hobbyking en casa nos dio la ventaja necesaria para desarrollar un CES como ninguna otra y por lo tanto nació la serie de Afro.

Con una alta eficiencia, todo el diseño MOSFET de canal N, entrada PWM de hardware sin fluctuaciones, y la respuesta de potencia uniforme la serie CES Afro van a cambiar las expectativas de los pilotos multi-rotor de todo el mundo. El buque de la serie CES Afro con un software específico SimonK multi-rotor precargado! No hay necesidad de reflash. Para mayor comodidad el enlazador USB Turnigy puede ser utilizado por el cable de señal de PWM para futuras actualizaciones de software que elimina la necesidad de plantillas que destellan complicadas o la necesidad de cortar el encogimiento del calor.

compatibilidad MikroKopter I2C también se ha construido en serie. Un puerto de bricolaje está disponible bajo la envoltura retráctil que permite utilizar el hardware ESC con MikroKopter que utiliza el control I2C.

Ahora Envío con OneShot125.
Algunas poblaciones pueden requerir a parpadear ESC para OneShot125 a través de herramienta de destello que se hace referencia en los artículos relacionados.

Especificaciones:
Consumo de corriente: 20A continuo
Rango de voltaje: 2-4s Lipo
BEC: Lineal 0.5A
Frecuencia de entrada: 1 KHz
Firmware: afro_nfet.hex
Alambre de descarga / tapones: 16 AWG / 3,5 mm macho
El cable del motor / tapones: 16 AWG / Mujer 3.5mm
Peso: 22,8 g (cable incluido, el enchufe, encogimiento del calor)
Tamaño: 45 x 25,7 x 10,5 mm

Las regalías pagadas por cada unidad vendida a SimonK y Hamasaki por su trabajo de diseño, sin la cual no habría nacido el CES Afro, gracias chicos!

  • SKU (Número de Referencia) 9192000131-0
  • Brand AFRO
  • Capacidad ( mAh ) -
  • Peso 31.0000
  • Longitud 100.00
  • Packaging Width 15.00
  • Altura 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good Esc's.

I ordered 4, and have one problem.

Been flying around and broke a prop,
Thought I'd do a bit of tuning whilst at home.

Enabled oneshot on cleanflight, went to test everything.
3 motors spin up, 1 doesn't.

Completely forgetting I had enabled oneshot, ordered a new motor and esc has wasn't sure what the problem is.

Today I remember I enabled oneshot, turned it off and all the motors work fine.

ONLY HOBBYKING CAN SEND ME 3 ESC ONESHOT COMPATIBLE AND ONE THAT ISN'T.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good Esc's.

I ordered 4, and have one problem.

Been flying around and broke a prop,
Thought I'd do a bit of tuning whilst at home.

Enabled oneshot on cleanflight, went to test everything.
3 motors spin up, 1 doesn't.

Completely forgetting I had enabled oneshot, ordered a new motor and esc has wasn't sure what the problem is.

Today I remember I enabled oneshot, turned it off and all the motors work fine.

ONLY HOBBYKING CAN SEND ME 3 ESC ONESHOT COMPATIBLE AND ONE THAT ISN'T.

Great little ESC's.


Just be aware that the BEC on them is only rated at 0.5A so won't be much use for models that have more than 1 or 2 servo's (fine for quads).


Also if ordering from the international warehouse, it took over a month for them to reach the UK!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little ESC's.


Just be aware that the BEC on them is only rated at 0.5A so won't be much use for models that have more than 1 or 2 servo's (fine for quads).


Also if ordering from the international warehouse, it took over a month for them to reach the UK!!!!

Great ESCs. I have purchased 15 before having any problems with them out of box. The one i did encounter a problem just reflashed the esc and like its brand new. I would recommend them to a friend, as i have many times already. HK seems to have them for the best price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great ESCs. I have purchased 15 before having any problems with them out of box. The one i did encounter a problem just reflashed the esc and like its brand new. I would recommend them to a friend, as i have many times already. HK seems to have them for the best price.

so good 20a escso good 20a escso good 20a esc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

so good 20a escso good 20a escso good 20a esc

I used these ESCs for my 450 sized quadcopter and they had great response time compared to my mutistar ones that I had before. I had no issues flying with these but the only issue I have with them is when I crash or have a harder landing the ESCs can shift and break due to a resistor breaking off on the board. There is no protection of the very tiny electronics on the ESC unlike some that have hard metal cover caps to protect and dissipate heat.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used these ESCs for my 450 sized quadcopter and they had great response time compared to my mutistar ones that I had before. I had no issues flying with these but the only issue I have with them is when I crash or have a harder landing the ESCs can shift and break due to a resistor breaking off on the board. There is no protection of the very tiny electronics on the ESC unlike some that have hard metal cover caps to protect and dissipate heat.

Great ESCs. Use them on several builds. Bullet connectors make it quick and easy. Some of them I had to reflash to get it working consistent, but I get that on all brands I buy at some point or another. Would recommend them to a friend (well I actually did several times already).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great ESCs. Use them on several builds. Bullet connectors make it quick and easy. Some of them I had to reflash to get it working consistent, but I get that on all brands I buy at some point or another. Would recommend them to a friend (well I actually did several times already).

Excellent ESC for beginners too

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent ESC for beginners too

Pleasantly surprised at this inexpensive ESC, it just fires up and works, the faster refresh rate is immediately evident when flying, and the price is perfect!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pleasantly surprised at this inexpensive ESC, it just fires up and works, the faster refresh rate is immediately evident when flying, and the price is perfect!

I got these on my tricopter and the turnigy multistar 2216 800 kv and I got lots of power and they don't even get hot on full throttle with 10x5 props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got these on my tricopter and the turnigy multistar 2216 800 kv and I got lots of power and they don't even get hot on full throttle with 10x5 props

These for the most part seem to be good esc. I did have one stop working, but I was using the bec for gimble servo and that servo went bad so might of pulled to many amp through the bec part or could of been bad esc, who knows.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These for the most part seem to be good esc. I did have one stop working, but I was using the bec for gimble servo and that servo went bad so might of pulled to many amp through the bec part or could of been bad esc, who knows.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
No File Name Download [78]
No File Name Download [78]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save