New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Controlador afro Race Spec Mini 20Amp Opto Multi-Velocidad del rotor

Controlador afro Race Spec Mini 20Amp Opto Multi-Velocidad del rotor

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

10,40 €
Estado:
En stock
SKU:
9192000259-0
WANT FREE SHIPPING? Click here to find out more!

La nueva raza de Especificaciones Mini 20A AFRO está orientado para los corredores mini FPV, cuenta con verdaderas capacidades 20A y sin embargo es el mismo tamaño o más pequeño que la mayoría ESC 12A. Esto fue posible gracias a un nuevo diseño de PCB de 4 capas para manejar la corriente y disipar el calor. Race Spec también se incluye con el último firmware con detección automática con un solo tiro y Comp-PWM habilitado. Race Spec es plug and play listo para competir.

Desarrollado desde el principio, queríamos construir un verdadero multi-rotor específica CES que ofrezca el mejor rendimiento y valor en el mercado hoy en día. Habíamos borrado limpio y cuidado a la comunidad en busca de inspiración y ayuda en el diseño de un CES que realmente podría ser conocido como "El Multi-rotor ESC"

Introduzca Simon y Hamasaki También conocido como SimonK y Timecop. Esta combinación de hardware y firmware experiencia en conjunto con el equipo de ingeniería Hobbyking en casa nos dio la ventaja necesaria para desarrollar un CES como ninguna otra y por lo tanto nació la serie de Afro.

Con una alta eficiencia, todo el diseño MOSFET de canal N, entrada PWM de hardware sin fluctuaciones, y la respuesta de potencia uniforme la serie CES Afro van a cambiar las expectativas de los pilotos multi-rotor de todo el mundo. El buque de la serie CES Afro con un software específico SimonK multi-rotor precargado! No hay necesidad de reflash. Para mayor comodidad el enlazador USB Turnigy puede ser utilizado por el cable de señal de PWM para futuras actualizaciones de software que elimina la necesidad de plantillas que destellan complicadas o la necesidad de cortar el encogimiento del calor.

Esta versión del controlador de velocidad del rotor multi-Afro se ha desarrollado especialmente para la creciente clase de carreras 250 FPV. Las exigencias del corredor FPV son muy altas, pero este controlador de velocidad cumple todos los requisitos adecuados, es muy pequeña y lighweight pero todavía paquetes de un poderoso golpe.

Tenga en cuenta que este controlador de velocidad es Opto por lo que se necesitará una fuente de alimentación independiente para el RC etc.

Especificaciones:
Consumo de corriente: 20A continuo
Rango de voltaje: 2-4s Lipo
BEC: Ninguno
Frecuencia de entrada: 1 KHz
Firmware: afro_nfet.hex
Alambre de descarga / tapones: 18 AWG / 2mm Hombre
El cable del motor / tapones: 18 AWG / 2mm Mujer
Peso: 10,7 g (cable incluido, el enchufe, encogimiento del calor)
Tamaño: 25 x 20 x 6,5 mm

Las regalías pagadas por cada unidad vendida a SimonK y Hamasaki por su trabajo de diseño, sin la cual no habría nacido el CES Afro, gracias chicos!

  • SKU (Número de Referencia) 9192000259-0
  • Brand AFRO
  • Capacidad ( mAh ) -
  • Peso 19.0000
  • Longitud 120.00
  • Packaging Width 10.00
  • Altura 100.00
  • Afro Race Spec ESC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is what i build all of my quad whit. Small i size but big in power. Light weight and easy to fit anywhere. Great product

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is what i build all of my quad whit. Small i size but big in power. Light weight and easy to fit anywhere. Great product

very responsive 20 amp, works great and well priced.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very responsive 20 amp, works great and well priced.

I had them for months now, and it works really well, I used in different motors and it performed super well with low as 530 Kv and also high as 2.000's, I have nothing to say other than I would buy it again!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had them for months now, and it works really well, I used in different motors and it performed super well with low as 530 Kv and also high as 2.000's, I have nothing to say other than I would buy it again!

so good 20a escso good 20a esc so good 20a esc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

so good 20a escso good 20a esc so good 20a esc

These have been good to me so far.

I ended up flashing with BLHeli as I found it to work better with the Motolab Cyclone Flight controller using Betaflight. I have stable looptimes of 1kHz using Lux Float.

This is on a Nighthawk clone 250 body.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These have been good to me so far.

I ended up flashing with BLHeli as I found it to work better with the Motolab Cyclone Flight controller using Betaflight. I have stable looptimes of 1kHz using Lux Float.

This is on a Nighthawk clone 250 body.

Bisher keinerlei Probleme mit diesen Reglern, laufen gut und schnell!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bisher keinerlei Probleme mit diesen Reglern, laufen gut und schnell!

Ordered 4, 2 were DOA. Had 2 replaced and ordered one extra just in case. I got one good one and two bad ones. I had to also buy the programmer and reflash them to BLHeli to get them to work because the SimonK firmware was throwing errors and not arming, so by no means were they plug-n-play. The good one did not perform like the other 3 good ones I had left and then it decided to smoke my motor and its replacement motor. They are cheap and there is a small chance they will work great, but a 4/7 failure rate is unacceptable. I have other afro escs that work fine, but no 20a ones besides my 3 survivors. Stay far away unless you want to mess with them a lot and replace them a lot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered 4, 2 were DOA. Had 2 replaced and ordered one extra just in case. I got one good one and two bad ones. I had to also buy the programmer and reflash them to BLHeli to get them to work because the SimonK firmware was throwing errors and not arming, so by no means were they plug-n-play. The good one did not perform like the other 3 good ones I had left and then it decided to smoke my motor and its replacement motor. They are cheap and there is a small chance they will work great, but a 4/7 failure rate is unacceptable. I have other afro escs that work fine, but no 20a ones besides my 3 survivors. Stay far away unless you want to mess with them a lot and replace them a lot.

they are a esc that produces pures gigawats. reminds me of my old flux capacitor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

they are a esc that produces pures gigawats. reminds me of my old flux capacitor

Bought four only two worked.. One exploded just after connecting it to a 2S LIPO (not 4s) I use Cobra 2208 and they have sync issues on 4s. After reflashing with BlHeli 14.1 or Rapidflash they do work quiet well. Definitely not an alternative to KISS or SNs (tried the afros because I had billions of KISS fires..)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought four only two worked.. One exploded just after connecting it to a 2S LIPO (not 4s) I use Cobra 2208 and they have sync issues on 4s. After reflashing with BlHeli 14.1 or Rapidflash they do work quiet well. Definitely not an alternative to KISS or SNs (tried the afros because I had billions of KISS fires..)

These things are very nice! - Flashed with Blheli 14.0, used that setup on the Afro 30, enabled oneshot and PWM Damped Light braking. No synch issues on 3S 40C & Cobra 2300KV - perfect match for my Warpquad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are very nice! - Flashed with Blheli 14.0, used that setup on the Afro 30, enabled oneshot and PWM Damped Light braking. No synch issues on 3S 40C & Cobra 2300KV - perfect match for my Warpquad.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save